Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK FAPC
Oil service appliance
Product image
Description
With the filter unit, hydraulic or lubricating oil systems can simply be filled and cleaned in the bypass flow.
The unit is suitable for use with mineral oils and eco-friendly hydraulic fluids.
The compact design allows easy access to the oil tank. The HK FAPC 016 is equipped with hoses and ready to connect.
The superfine filter elements can be replaced without any special tools required. The suction and pressure hoses are coiled up directly on the device.
Remaining oil droplets are collected in the oil drip tray.
The heart of the filtration appliance are the EXAPOR® superfine filter elements. High separation rates guarantee very high degrees of cleanliness, and hence maximum component protection. The high soiling absorption capacity of the EXAPOR® ultrafine filter elements permit cost-effective operation of the unit. A pressure gauge indicates when the filter element has to be replaced.
The water-absorbing filter element EXAPOR® Aqua can be installed briefly to remove small amounts of water from hydraulic oils - available on request -
The HK FAPC 016 is equipped with a purity class monitor OPComII. The purity class achieved during the filling or cleaning process is continuously monitored.
When monitoring the purity level a ball cock can be used to select between "downstream of filter" (e.g. when filling systems) or "upstream of filter" (e.g. cleansing oil fillings). Selection between particle sizes 4, 6, 14 and 21 μm can be made on the display. The reference number for the selected particle size according to ISO 4406:1999 is displayed on the monitor.
The monitor can be configured by PC using the infrared interface .The data can be transferred to the computer via the RS232 interface, where it can be displayed graphically or in tabular form and tracked.
Note
Length of suction/pressure hose 1.8 / 2.0 m
The device is equipped with a data memory (storage of 500 purity classes with date and time; download in Excel-compatible format).
Item
Sort upwards
Sort downwards
 Identification |
Nominal volume current (L/min) |
Soiling capacity (g) |
Viscosity mm2/s max. | Electric motor | for filter type | Suction height max. (m) |
BD max. (bar) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| HK FAPC 016 2105 | 16 | 280 | 150 | 230V/50Hz0,45kW | 3E-Nß(c)=200 | 1,5 | 4 | 24 |
BD = Working pressure
Accessories
- HK FAPC 1760
- Unit carrier
Spare parts
- HK FAPC F
- Filter element for oil service appliance HK FAPC 016
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.