K-DRG DRVS MULTIFIX
Pressure regulators with pressure supply at both ends
Toote pilt


Omadused
Sisendrõhk |
Max. 16 bar |
Aine temperatuur |
max. 60 °C |
Keskkonnatemperatuur |
Max. 60 °C |
Tihendusmaterjal |
NBR |
Vedrukate |
POM-brass |
Korpus |
Die-cast zinc |
Läbivoolu väärtuse mõõtmine |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Kirjeldus
Diaphragm pressure regulators with self-relieving design for mounting side by side. The pressure setting can be locked by pushing the knob down.
By assembling two or more controllers together, it is possible to supply several working air circuits with different output pressures via a single supply line.
Vihje
Lisaandmed saate soovi korral.
Artikkel

Alustada sorteerimist ülalt
Alustada sorteerimist altpoolt
![]() |
Keere | Reguleerimisvahemik | Läbivool (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN | Ehitussuurus |
---|---|---|---|---|---|---|---|---|---|
K- 07 25 00 31 | G 1/4 | 0.1 - 3 bar | 2000 | 47,8 | 94,8 mm | 67,0 | 27,8 | 6 | 1 |
K- 07 25 00 32 | G 1/4 | 0.2 - 6 bar | 2000 | 47,8 | 94,8 mm | 67,0 | 27,8 | 6 | 1 |
K- 07 25 00 30 | G 1/4 | 0.5 - 10 bar | 2000 | 47,8 | 94,8 mm | 67,0 | 27,8 | 6 | 1 |
K- 07 25 00 34 | G 1/2 | 0.1 - 3 bar | 5500 | 68,8 | 134,1 mm | 99,0 | 35,1 | 15 | 2 |
K- 07 25 00 35 | G 1/2 | 0.2 - 6 bar | 5500 | 68,8 | 134,1 mm | 99,0 | 35,1 | 15 | 2 |
K- 07 25 00 33 | G 1/2 | 0.5 - 10 bar | 5500 | 68,8 | 134,1 mm | 99,0 | 35,1 | 15 | 2 |
Tellimisinfo
The port for the output pressure (P2) is on the rear! K-07250031: G 1/4, K-07250034: G 1/2. Lockable pressure regulators K-07250030 available on request.
Varuosad

- K-HALTERBAUSATZ
- Holder
- K-SCHALTTAFELMUTTER
- Nut
- K-HALTERBAUSATZ MULTIFIX
- Holder
- K-KOPPELPAKET MEHR
- Coupling packet
- K-KOPPELPAKET SCHMA
- Coupling packet
- K-VERSCHLEI-SATZ
- Set of wearing parts
Tingimused
Vaatamata põhjalikule kontrollile ei saa me vigade esinemist välistada ning ei vastuta olemasolevate andmete eest.
Kõik andmed meie Interneti-kataloogis põhinevad hetkel kehtivatel normidel ja kutseliidu eeskirjadel. Ainult meie ettenähtud montaažieeskirjadest kinnipidamine garanteerib teile tootekindluse. Kõikide äratoodud eeskirjade mittetäitmine võib toote töökindlust kahandada ning lõpetada meie garantii kehtivuse. Meie garantii kehtib igal juhul vaid HANSA-FLEXi toodetele. Meie tooteid arendatakse pidevalt edasi, mistõttu on tehnilised muudatused võimalikud.