MVO
Pressure gauge connection fittingProduct image
Properties
Connection 1 |
BSP cylindrical internal threads |
Sealing form 1 |
Edge sealing ring |
Connection 2 |
metric nut thread |
Sealing form 2 |
24° outer cone with O-ring |
Design |
Pressure gauge connection fitting |
Scope of supply |
with edge sealing ring |
Material |
Steel |
Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
Identification | Series | Ø d2 (mm) |
Operating pressure | G1 | i (mm) |
L1 (mm) |
AF (mm) |
S1 | OR |
---|---|---|---|---|---|---|---|---|---|
MVO NW 04 L | L | 6 | PN 315 | G 1/4" -19 | 14,5 | 36,5 | 19 | 14 | 4.0 x 1.5 |
MVO NW 06 L | L | 8 | PN 315 | G 1/4" -19 | 14,5 | 36,5 | 19 | 17 | 6.0 x 1.5 |
MVO NW 08 L | L | 10 | PN 315 | G 1/4" -19 | 14,5 | 36,0 | 19 | 19 | 7.5 x 1.5 |
MVO NW 10 L | L | 12 | PN 315 | G 1/4" -19 | 14,5 | 37,5 | 19 | 22 | 9.0 x 1.5 |
MVO NW 03 S 1/4 | S | 6 | PN 630 | G 1/4" -19 | 14,5 | 35,5 | 19 | 17 | 4.0 x 1.5 |
MVO NW 03 S | S | 6 | PN 630 | G 1/2" -14 | 20,0 | 43,5 | 27 | 17 | 4.0 x 1.5 |
MVO NW 04 S 1/4 | S | 8 | PN 630 | G 1/4" -19 | 14,5 | 35,5 | 19 | 19 | 6.0 x 1.5 |
MVO NW 04 S | S | 8 | PN 630 | G 1/2" -14 | 20,0 | 43,0 | 27 | 19 | 6.0 x 1.5 |
MVO NW 06 S 1/4 | S | 10 | PN 630 | G 1/4" -19 | 14,5 | 36,0 | 19 | 22 | 7.5 x 1.5 |
MVO NW 06 S | S | 10 | PN 630 | G 1/2" -14 | 20,0 | 45,0 | 27 | 22 | 7.5 x 1.5 |
MVO NW 08 S 1/4 | S | 12 | PN 630 | G 1/4" -19 | 14,5 | 39,0 | 19 | 24 | 9.0 x 1.5 |
MVO NW 08 S | S | 12 | PN 630 | G 1/2" -14 | 20,0 | 44,5 | 27 | 24 | 9.0 x 1.5 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d2 = External pipe diameter
Spare parts
- DKI
- Edge sealing ring for internal thread
Product versions
This product is also available in the following designs:
- MVO VA
- Pressure gauge connection fitting, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.