Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SRD MG
Cutting ring
Product image
Properties
| Design |
Cutting ring |
| Standard |
DIN 3861 |
| Material |
Brass |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | Ø d2 (mm) |
L1 (mm) |
|---|---|---|---|
| SRD 04 LL MG | LL | 4 | 6,0 |
| SRD 05 LL MG | LL | 5 | 7,0 |
| SRD 06 LL MG | LL | 6 | 7,0 |
| SRD 08 LL MG | LL | 8 | 7,0 |
| SRD 10 LL MG | LL | 10 | 7,0 |
| SRD 12 LL MG | LL | 12 | 7,5 |
| SRD 06 MG | L / S | 6 | 9,5 |
| SRD 08 MG | L / S | 8 | 9,5 |
| SRD 10 MG | L / S | 10 | 10,0 |
| SRD 12 MG | L / S | 12 | 10,0 |
| SRD 14 MG | S | 14 | 10,0 |
| SRD 15 MG | L | 15 | 10,0 |
| SRD 16 MG | S | 16 | 10,5 |
| SRD 18 MG | L | 18 | 10,0 |
| SRD 20 MG | S | 20 | 12,5 |
| SRD 22 MG | L | 22 | 10,5 |
| SRD 25 MG | S | 25 | 12,5 |
| SRD 28 MG | L | 28 | 10,5 |
| SRD 30 MG | S | 30 | 13,0 |
| SRD 35 MG | L | 35 | 13,0 |
| SRD 38 MG | S | 38 | 13,5 |
| SRD 42 MG | L | 42 | 13,0 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø d2 = External pipe diameter
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.