PA 700 AOB
Swage fitting, DKOR
Product image
![PA 700 AOB PA 700 AOB](/data/img/product/PA_700_AOB.jpg)
![PA 700 AOB - data/img/product/PA_xxx_AOS(AOB,AOL,)_MEx.gif data/img/product/PA_xxx_AOS(AOB,AOL,)_MEx.gif - PA 700 AOB](/data/img/product/PA_xxx_AOS(AOB,AOL,)_MEx.gif)
Properties
Application |
Swage fitting for HD 700 hoses |
Connection 1 |
BSP nut thread |
Sealing form 1 |
60° outer cone with O-ring |
Short code |
DKOR |
Standard |
ISO 8434-6 BS 5200 |
Integration |
with pull-out protection (interlock) |
Scope of supply |
Swage nipple + swage ferrule |
Material |
Steel |
Surface |
electro galvanised |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN | Size | Inches | Operating pressure (bar) |
G1 | L1 (mm) |
S1 | OR |
---|---|---|---|---|---|---|---|---|
PA 720 AOB | 19 | 12 | 3/4" | 420,0 | G 3/4" -14 | 88,0 | 32 | 17.1 x 1.6 |
PA 725 AOB | 25 | 16 | 1" | 420,0 | G 1" -11 | 102,5 | 41 | 22.1 x 1.6 |
PA 732 AOB | 31 | 20 | 1.1/4" | 420,0 | G 1.1/4" -11 | 116,0 | 50 | 29.1 x 1.6 |
PA 740 AOB | 38 | 24 | 1.1/2" | 420,0 | G 1.1/2" -11 | 133,5 | 55 | 35.1 x 1.6 |
PA 740 AOB 50 | 38 | 24 | 1.1/2" | 345,0 | G 2" -11 | 143,2 | 70 | 48.1 x 1.6 |
Product versions
![](/images/up.gif)
This product is also available in the following designs:
- PA 700 AOB VA
- Swage fitting, DKOR, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.