NRS W4 (15 mm)
Retaining clampProduct image
Properties
Application |
for mounting pipes, hoses and cables |
Design |
Pipe clamp |
Construction type |
with rubber profile |
Standard |
DIN 3016 |
Material |
Chrome nickel steel (1.4301) |
Item
Sort upwards
Sort downwards
Identification | Minimum Ø (mm) |
Band width (mm) |
Hole Ø (mm) |
---|---|---|---|
NRS 05-15 W4 | 5 | 15,0 | 6,4 |
NRS 06-15 W4 | 6 | 15,0 | 6,4 |
NRS 07-15 W4 | 7 | 15,0 | 6,4 |
NRS 08-15 W4 | 8 | 15,0 | 6,4 |
NRS 09-15 W4 | 9 | 15,0 | 6,4 |
NRS 10-15 W4 | 10 | 15,0 | 6,4 |
NRS 11-15 W4 | 11 | 15,0 | 6,4 |
NRS 12-15 W4 | 12 | 15,0 | 6,4 |
NRS 13-15 W4 | 13 | 15,0 | 6,4 |
NRS 14-15 W4 | 14 | 15,0 | 6,4 |
NRS 15-15 W4 | 15 | 15,0 | 6,4 |
NRS 16-15 W4 | 16 | 15,0 | 6,4 |
NRS 17-15 W4 | 17 | 15,0 | 6,4 |
NRS 18-15 W4 | 18 | 15,0 | 6,4 |
NRS 19-15 W4 | 19 | 15,0 | 6,4 |
NRS 20-15 W4 | 20 | 15,0 | 6,4 |
NRS 21-15 W4 | 21 | 15,0 | 6,4 |
NRS 22-15 W4 | 22 | 15,0 | 6,4 |
NRS 23-15 W4 | 23 | 15,0 | 6,4 |
NRS 24-15 W4 | 24 | 15,0 | 6,4 |
NRS 25-15 W4 | 25 | 15,0 | 6,4 |
NRS 26-15 W4 | 26 | 15,0 | 6,4 |
NRS 27-15 W4 | 27 | 15,0 | 6,4 |
NRS 28-15 W4 | 28 | 15,0 | 6,4 |
NRS 29-15 W4 | 29 | 15,0 | 6,4 |
NRS 30-15 W4 | 30 | 15,0 | 6,4 |
NRS 31-15 W4 | 31 | 15,0 | 6,4 |
NRS 32-15 W4 | 32 | 15,0 | 6,4 |
NRS 33-15 W4 | 33 | 15,0 | 6,4 |
NRS 34-15 W4 | 34 | 15,0 | 6,4 |
NRS 35-15 W4 | 35 | 15,0 | 6,4 |
NRS 36-15 W4 | 36 | 15,0 | 6,4 |
NRS 37-15 W4 | 37 | 15,0 | 6,4 |
NRS 38-15 W4 | 38 | 15,0 | 6,4 |
NRS 39-15 W4 | 39 | 15,0 | 6,4 |
NRS 40-15 W4 | 40 | 15,0 | 6,4 |
Product versions
This product is also available in the following designs:
- NRS (15 mm)
- Retaining clamp, Steel
- NRS (9 mm)
- Retaining clamp, Steel
- NRS (12 mm)
- Retaining clamp, Steel
- NRS W4 (12 mm)
- Retaining clamp, Chrome nickel steel (1.4301)
- NRS (20 mm)
- Retaining clamp, Steel
- NRS W4 (20 mm)
- Retaining clamp, Chrome nickel steel (1.4301)
- NRS (25 mm)
- Retaining clamp, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.