HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

WFS M (3000 / 6000 PSI)

SAE flange adapter, welded on, angle 90°
Hide product imageProduct image
WFS M (3000 / 6000 PSI) data/img/product/W_SFA_MEx.gif - WFS M (3000 / 6000 PSI)
Hide propertiesProperties
Standard SAE J 518 C
ISO 6162
Construction Angle 90°
Design SAE flange adapter welded on connecting piece
Scope of supply with 2 flange halves, screw set and O-ring
Material S355J2G3 (ST52.3)
Surface black oiled
Hide informationNote

In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.

Hide product tableItem

Sort upwards

Sort downwards

PN = Nominal pressure PB = Max. operating pressure 

*1) = Choice of 10.5, 12.0 or 12.5  – *3) = Choice of 12.0 or 12.5  – *4) = Choice of 13.5 or 14.5  – *2) = Choice of M 10 x 30 or M 12 x 35 

Hide product versionsProduct versions

This product is also available in the following designs:

WFS (3000 PSI)
SAE flange adapter, welded on, angle 90°, flange only
WFS U (3000 / 6000 PSI)
SAE flange adapter, welded on, angle 90°, with 2 flange halves, screw set and O-ring
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.