K-L-STECKVER AG-K
Male elbows, conical male thread
Product image
![K-L-STECKVER AG-K K-L-STECKVER AG-K](/data/img/product/00004742_0.jpg)
![K-L-STECKVER AG-K - data/img/product/00042678_0.gif data/img/product/00042678_0.gif - K-L-STECKVER AG-K](/data/img/product/00042678_0.gif)
Properties
Working pressure |
Max. 16 bar |
Operating temperature |
-20 °C to +80 °C |
Material |
Nickel-plated brass |
Contact pressure ring |
Hostaform |
Clamping ring |
Stainless steel |
Description
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass. Advantages of this new, optimised series: Much easier connection and disconnection of the hose, even with repeated mounting, can also be used for non-calibrated hoses, suitable for vacuum operation.
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Thread | for external hose Ø | L1 (mm) |
L2 (mm) |
AF |
---|---|---|---|---|---|
K- 07 40 25 65 | R 1/8 | 4 mm | 18,6 | 16,0 | 10 mm |
K- 07 40 25 66 | R 1/8 | 6 mm | 21,9 | 16,0 | 10 mm |
K- 07 40 25 67 | R 1/8 | 8 mm | 25,4 | 16,0 | 10 mm |
K- 07 40 25 63 | R 1/4 | 6 mm | 21,9 | 18,5 | 10 mm |
K- 07 40 25 64 | R 1/4 | 8 mm | 25,4 | 18,5 | 10 mm |
K- 07 40 25 62 | R 1/4 | 10 mm | 27,2 | 22,0 | 14 mm |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.