K-BOGEN IG IG 45°
Bends 41, 45°, female/female
Product image
![K-BOGEN IG IG 45° K-BOGEN IG IG 45°](/data/img/product/00015392_0.jpg)
Properties
Surface |
Hot dip galvanised |
Temp. range |
-20 °C to +300 °C (at 20 bar) |
Connecting thread |
acc. ISO 7-1 |
Material |
Black malleable iron B350-10, design symbol A |
Approval |
DIN DVGW |
Description
Acc. to DIN EN 10242 (formerly DIN 2950). The classic - and the most popular - screw fitting series for pipe construction. These fittings are characterized by their high mechanical strength and surface quality to DIN 2444. They are completely coated with a layer of pure zinc and are therefore suitable for drinking water. They are also protected against rust. The fittings are used in pipe construction, plumbing and gas installations as well as a wide range of industrial applications.
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Thread |
---|---|
K- 07 40 36 56 | Rp 3/8 |
K- 07 40 36 53 | Rp 1/2 |
K- 07 40 36 55 | Rp 3/4 |
K- 07 40 36 50 | Rp 1 |
K- 07 40 36 52 | Rp 1 1/4 |
K- 07 40 36 51 | Rp 1 1/2 |
K- 07 40 36 54 | Rp 2 |
K- 07 40 51 30 | Rp 2 1/2 |
K- 07 40 51 31 | Rp 3 |
Additional information
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.