Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WTEH KOMBI PC-BEHAELTER H ABLV
Combination service units with polycarbonate bowl and manual drain valve
Product image
Properties
| Input pressure |
Max. 16 bar (polycarbonate bowl), Max. 25 bar (metal bowl) |
| Media temperature |
max. 50 °C |
| Ambient temperature |
Max. 50 °C |
| Pore size in filter element |
50 μm |
| Sealant |
NBR |
| Housing |
Die-cast zinc, Spring bonnet; PA |
| Dropper |
PA |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
A filter, pressure regulator and oil-mist lubricator combined in a single device with an extremely compact design. The pressure setting can be locked by pushing the knob down. Oil can be filled under pressure.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
|---|---|---|---|---|---|---|
| K- 07 25 08 44 | G 1/4 | 0.5 - 10 bar | 1400 | 67,0 | 217.0 mm | 68,5 |
| K- 07 25 08 46 | G 1/4 | 0.5 - 16 bar | 1000 | 67,0 | 217.0 mm | 68,5 |
| K- 07 25 08 48 | G 3/8 | 0.5 - 10 bar | 1400 | 67,0 | 217.0 mm | 68,5 |
| K- 07 25 08 50 | G 3/8 | 0.5 - 16 bar | 1000 | 67,0 | 217.0 mm | 68,5 |
| K- 07 25 08 52 | G 1/2 | 0.5 - 10 bar | 1400 | 65,0 | 217.0 mm | 68,5 |
| K- 07 25 08 54 | G 1/2 | 0.5 - 16 bar | 1000 | 65,0 | 217.0 mm | 68,5 |
| K- 07 25 08 56 | G 3/4 | 0.5 - 10 bar | 3400 | 97,0 | 296.5 mm | 96,5 |
| K- 07 25 08 58 | G 3/4 | 0.5 - 16 bar | 2800 | 97,0 | 296.5 mm | 96,5 |
| K- 07 25 08 60 | G 1 | 0.5 - 10 bar | 3400 | 93,0 | 296.5 mm | 96,5 |
| K- 07 25 08 62 | G 1 | 0.5 - 16 bar | 2800 | 93,0 | 296.5 mm | 96,5 |
Spare parts
- K-HALTERBAUSATZ SERIE 81
- Holder for series 81
- K-ERSATZBEHAEL KOMBI
- Spare tank
- K-SCHUTZKORB G
- Protective cage
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-TROPFAUFSATZ POLYCARBO
- Drip attachment polycarbonate
- K-TROPFAUFSATZ METALL
- Drip attachment metal
- K-FILTERELEMENT
- Filter element
- K-ABLASSVENTIL AUTO
- Fully-automatic drain valve with Adapter G 1/8
- K-RD NIPPEL KURZ 1
- Reducing nipples, short type
- K-XV AGM 2
- Double nipples, parallel male thread
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.