K-FI SERIE FILTER PLUG
FiltersProduct image
Properties
Temp. range |
0 °C to +90 °C |
Working pressure |
Max. 10 bar |
Filter element |
Sintered bronze |
Description
For mounting on pneumatic tools and protecting them against impurities, especially in dirty or dusty working environments.
Inline filters: Extend the service life of the tool, Do not impair the flow, Assure the oil mist supply to the tool. Designed for use with standard DN 7.2 couplings.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Material | Thread |
---|---|---|
K- 07 25 05 80 | Nickel-plated steel | R 1/4 |
K- 07 25 05 81 | Nickel-plated steel | R 3/8 |
Spare parts
- K-ZUBEHOER F K-FI SERIE FILTER PLUG
- Filter element
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.