PN AOBK 90
Swage nipple, DKOR Comp. angle 90°Product image
Properties
Application |
Swage nipple for HD 100 to HD 400, KP and TE hoses |
Connection 1 |
BSP nut thread |
Sealing form 1 |
60° outer cone with O-ring |
Construction type |
Compact form |
Short code |
DKOR |
Standard |
BS 5200 |
Material |
Steel |
Surface |
electro galvanised |
Note
Choose the appropriate ferrule based on the hose type.
Item
Sort upwards
Sort downwards
Identification | DN | Size | Inches | Operating pressure (bar) |
G1 | L1 (mm) |
L2 (mm) |
S1 | OR |
---|---|---|---|---|---|---|---|---|---|
PN 06 AOBK 90 | 6 | 4 | 1/4" | 400,0 | G 1/4" -19 | 46,0 | 22,5 | 19 | 6.0 x 1.0 |
PN 10 AOBK 90 | 10 | 6 | 3/8" | 400,0 | G 3/8" -19 | 50,0 | 27,0 | 22 | 8.1 x 1.6 |
PN 13 AOBK 90 | 12 | 8 | 1/2" | 350,0 | G 1/2" -14 | 54,5 | 28,5 | 27 | 12.1 x 1.6 |
PN 16 AOBK 90 | 16 | 10 | 5/8" | 350,0 | G 5/8" -14 | - | - | - | 14.1 x 1.6 |
PN 20 AOBK 90 | 19 | 12 | 3/4" | 315,0 | G 3/4" -14 | 68,5 | 38,5 | 32 | 22.1 x 1.6 |
PN 25 AOBK 90 | 25 | 16 | 1" | 250,0 | G 1" -11 | - | - | - | 22.1 x 1.6 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.