K-RUNDZYLINDER DOPP O E D MI
Round cylinders, double-acting, with magnet, non-cushioned, »MI« Series
Imagen del producto
![K-RUNDZYLINDER DOPP O E D MI K-RUNDZYLINDER DOPP O E D MI](/data/img/product/00041490_0.jpg)
![K-RUNDZYLINDER DOPP O E D MI - data/img/product/00048889_0.gif data/img/product/00048889_0.gif - K-RUNDZYLINDER DOPP O E D MI](/data/img/product/00048889_0.gif)
Características
Medios |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
Presión de funcionamiento |
1 - 10 bar (double-acting); 2 - 10 bar (single-acting) |
Rango de temperatura |
-20 °C to +70 °C |
Vást.pistón |
Stainless steel 1.4301 |
Versión |
Type "CA" = ground cover with threaded pin - swivel design Type "CM" = ground cover with threaded pin round - swivel design |
Pistón |
Stainless steel 1.4305 (8 to 12 mm); Alu (16 to 40 mm) |
Material obturador |
NBR |
T.cilíndrico |
Stainless steel 1.4301 |
Descripción
Circular cylinder in stainless steel in different versions: Series "MI" double-acting, Ø 8 – 25 in accordance with ISO 6432
Series "MI" double-acting, Ø 32 - 40
Nota
Otras especificaciones a petición.
Artículo
![](/images/up.gif)
Clasificar en orden ascendente
Clasificar en orden descendente
![]() |
Ø pistón | Carrera (mm) |
Versión | Ø Vást.pistón (mm) |
Rosca exterior de vást. pistón |
---|---|---|---|---|---|
K- 07 15 17 90 | 8 mm | 10 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 91 | 8 mm | 15 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 92 | 8 mm | 20 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 93 | 8 mm | 25 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 94 | 8 mm | 30 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 95 | 8 mm | 40 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 96 | 8 mm | 50 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 97 | 8 mm | 60 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 98 | 8 mm | 75 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 17 99 | 8 mm | 80 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 00 | 8 mm | 100 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 01 | 8 mm | 125 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 02 | 8 mm | 150 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 03 | 10 mm | 10 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 04 | 10 mm | 15 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 05 | 10 mm | 20 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 06 | 10 mm | 25 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 07 | 10 mm | 30 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 08 | 10 mm | 40 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 09 | 10 mm | 50 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 10 | 10 mm | 60 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 11 | 10 mm | 75 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 12 | 10 mm | 80 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 13 | 10 mm | 100 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 14 | 10 mm | 125 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 15 | 10 mm | 150 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 16 | 10 mm | 160 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 17 | 10 mm | 175 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 18 | 10 mm | 200 | »CA« type, acc. to ISO 6432 | 4 | M 4 x 0.7 |
K- 07 15 18 19 | 12 mm | 10 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 20 | 12 mm | 15 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 21 | 12 mm | 20 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 22 | 12 mm | 25 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 23 | 12 mm | 30 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 24 | 12 mm | 40 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 25 | 12 mm | 50 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 26 | 12 mm | 60 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 27 | 12 mm | 75 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 28 | 12 mm | 80 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 29 | 12 mm | 100 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 30 | 12 mm | 125 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 31 | 12 mm | 150 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 32 | 12 mm | 160 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 33 | 12 mm | 175 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 34 | 12 mm | 200 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 35 | 12 mm | 250 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 36 | 16 mm | 10 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 37 | 16 mm | 15 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 38 | 16 mm | 20 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 39 | 16 mm | 25 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 40 | 16 mm | 30 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 41 | 16 mm | 40 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 42 | 16 mm | 50 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 43 | 16 mm | 60 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 44 | 16 mm | 75 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 45 | 16 mm | 80 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 46 | 16 mm | 100 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 47 | 16 mm | 125 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 48 | 16 mm | 150 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 49 | 16 mm | 160 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 50 | 16 mm | 175 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 51 | 16 mm | 200 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 52 | 16 mm | 250 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 53 | 16 mm | 300 | »CA« type, acc. to ISO 6432 | 6 | M 6 x 1 |
K- 07 15 18 54 | 20 mm | 10 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 55 | 20 mm | 15 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 56 | 20 mm | 20 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 57 | 20 mm | 25 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 58 | 20 mm | 30 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 59 | 20 mm | 40 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 60 | 20 mm | 50 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 61 | 20 mm | 60 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 62 | 20 mm | 75 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 63 | 20 mm | 80 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 64 | 20 mm | 100 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 65 | 20 mm | 125 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 66 | 20 mm | 150 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 67 | 20 mm | 160 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 68 | 20 mm | 175 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 69 | 20 mm | 200 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 70 | 20 mm | 250 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 71 | 20 mm | 300 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 72 | 20 mm | 350 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 73 | 20 mm | 400 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 74 | 20 mm | 450 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 75 | 20 mm | 500 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 76 | 20 mm | 600 | »CA« type, acc. to ISO 6432 | 8 | M 8 x 1.25 |
K- 07 15 18 77 | 25 mm | 10 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 78 | 25 mm | 15 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 79 | 25 mm | 20 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 80 | 25 mm | 25 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 81 | 25 mm | 30 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 82 | 25 mm | 40 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 83 | 25 mm | 50 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 84 | 25 mm | 60 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 85 | 25 mm | 75 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 86 | 25 mm | 80 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 87 | 25 mm | 100 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 88 | 25 mm | 125 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 89 | 25 mm | 150 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 90 | 25 mm | 160 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 91 | 25 mm | 175 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 92 | 25 mm | 200 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 93 | 25 mm | 250 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 94 | 25 mm | 300 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 95 | 25 mm | 350 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 96 | 25 mm | 400 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 97 | 25 mm | 450 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 98 | 25 mm | 500 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 18 99 | 25 mm | 600 | »CA« type, acc. to ISO 6432 | 10 | M 10 x 1.25 |
K- 07 15 19 00 | 32 mm | 10 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 01 | 32 mm | 15 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 02 | 32 mm | 20 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 03 | 32 mm | 25 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 04 | 32 mm | 30 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 05 | 32 mm | 40 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 06 | 32 mm | 50 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 07 | 32 mm | 60 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 08 | 32 mm | 75 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 09 | 32 mm | 80 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 10 | 32 mm | 100 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 11 | 32 mm | 125 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 12 | 32 mm | 150 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 13 | 32 mm | 160 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 14 | 32 mm | 175 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 15 | 32 mm | 200 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 16 | 32 mm | 250 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 17 | 32 mm | 300 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 18 | 32 mm | 350 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 19 | 32 mm | 400 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 20 | 32 mm | 450 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 21 | 32 mm | 500 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 22 | 32 mm | 600 | »CM« type | 12 | M 10 x 1.25 |
K- 07 15 19 23 | 40 mm | 10 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 24 | 40 mm | 15 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 25 | 40 mm | 20 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 26 | 40 mm | 25 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 27 | 40 mm | 30 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 28 | 40 mm | 40 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 29 | 40 mm | 50 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 30 | 40 mm | 60 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 31 | 40 mm | 75 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 32 | 40 mm | 80 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 33 | 40 mm | 100 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 34 | 40 mm | 125 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 35 | 40 mm | 150 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 36 | 40 mm | 160 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 37 | 40 mm | 175 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 38 | 40 mm | 200 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 39 | 40 mm | 250 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 40 | 40 mm | 300 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 41 | 40 mm | 350 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 42 | 40 mm | 400 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 43 | 40 mm | 450 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 44 | 40 mm | 500 | »CM« type | 16 | M 12 x 1.25 |
K- 07 15 19 45 | 40 mm | 600 | »CM« type | 16 | M 12 x 1.25 |
Accesorios
![](/images/up.gif)
- K-FUSSBEFESTIGUNG TYP LB 1
- Foot model, »LB« type
- K-FLANSCHBEFESTIGUNG TYP FA3
- Flange model, »FA« type
- K-SCHWENKLAGER TYP SDB
- Counter-hinge model, »SDB« type
- K-SCHWENKGABELBEFESTIG TC
- Hinge head model, »TC« type
- K-GABELKOEPFE TYP Y 1
- Fork model, »Y« type
- K-GELENKAUGEN TYP UNIT 1
- Rod eye model, »UNIT« type
- K-SENSOREN CS1 RD MIT STECKER
- Sensors »CS1« type, cable with M8 plug
- K-SENSOREN CS1 RD OHNE STECKER
- Sensors »CS1« type, cable without plug
Exención de responsabilidad
Hemos revisado cuidadosamente esta publicación, pero no obstante no podemos excluir los errores y no garantizamos los datos que constan aquí.
Todos los datos en nuestro catálogo en línea se basan en las normas legales y especificaciones profesionales válidas en ese momento. La seguridad del producto solo está garantizada si se cumplen estrictamente las instrucciones de montaje que indicamos. Si no se observan estas instrucciones, la seguridad del producto puede salir perjudicada y causar la anulación de nuestro compromiso de garantía. En todo caso, solo los productos HANSA-FLEX están cubiertos por nuestra garantía. Nuestros productos están sometidos a un desarrollo continuo, por eso nos reservamos el derecho a modificaciones técnicas.