Odabrati jezik
Bugarski (Български)
Engleski (English)
Estonski (Eesti)
Francuski (Français)
Kineski (汉语)
Latvijski (Latviešu)
Litavski (Lietuvių k.)
Mađarski (Magyar)
Nizozemski (Nederlands)
Njemački (Deutsch)
Poljski (Polski)
Portugalski (Português)
Rumunjski (Română)
Ruski (Русский)
Slovački (Slovenčina)
Slovenski (Slovenščina)
Srpski (Српска)
Talijanski (Italiano)
Turski (Türkçe)
Češki (Čeština)
Španjolski (Español)
K-SCHLAUCHBRUCHSICHERUNG
Hose rupture valves Typ Hose Guard
Slika proizvoda
Karakteristike
| Kućište |
Aluminium |
| Klip |
Polyacetate (G 1/4 to G 1/2); Aluminium (G 3/4 to G 2) |
| O-prsten |
NBR |
| maks. ulazni tlak |
18 bar (G 1/4 to G 3/4); 35 bar (G 1 to G 2) |
| Temperaturno područje |
-20 °C to +80 °C (G 1/4 to G 1/2) -20 °C to +120 °C (G 3/4 to G 2) |
| Ugradnja |
Upstream of a coupling (connector between hard piping and junction box/coupling) and downstream of a service unit |
Opis
Efficient protection for ruptured hoses or pipes in pneumatic systems. Preset to permit normal air consumption by pneumatic tools. Hose Guard detects a rupture in a hose or pipe and interrupts the supply of compressed air in a fraction of a second apart from a minimal residual flow. Unaffected parts of the compressed air system remain fully pressurised, so that the damaged hose or segment can be replaced without difficulty. Once the ruptured hose or pipe has been repaired, the replaced segment gradually fills to its working pressure level. As soon as this occurs, Hose Guard opens the line again for normal operation. Hose Guard protects personnel, machinery and plant against damage if a pneumatic system or hose ruptures, complies with the EU standard DIN EN ISO 4414: 2010, 2011-04 - § 5.4.5.11, is reliable and tamper-proof, can be installed in any pneumatic system, bears the TÜV test mark 01-02-0145.
Napomena
Drugi podatci na zahtjev.
Artikl
poredati uzlazno
poredati silazno
 Naziv |
Navoj | SW (mm) |
Duljina (mm) |
|---|---|---|---|
| K- 07 30 24 84 | G 1/4 male/female | 22 | 57,0 |
| K- 07 30 24 86 | G 3/8 male/female | 27 | 76,0 |
| K- 07 30 24 83 | G 1/2 male/female | 30 | 80,0 |
| K- 07 30 24 88 | G 1/4 female/female | 22 | 48,0 |
| K- 07 30 24 90 | G 3/8 female / female | 27 | 59,0 |
| K- 07 30 24 87 | G 1/2 female/female | 30 | 65,0 |
| K- 07 30 24 89 | G 3/4 female/female | 36 | 76,0 |
| K- 07 30 24 82 | G 1 female/female | 50 | 100,0 |
| K- 07 30 24 85 | G 2 female/female | 80 | 130,0 |
Napomene uz narudžbu
ATTENTION: For suitable hoses, please check the respective data sheet.
Isključenje jamstva
Usprkos pažljivoj provjeri ne mogu se isključiti pogreške i zbog toga ne preuzimamo odgovornost za sadržane podatke.
Svi podaci u našem online katalogu temelje se na trenutno važećim normama i propisima strukovne zadruge. Poštivanje naših propisa montaže jamče Vam sigurnost proizvoda. Nepoštivanje svih navedenih propisa može ugroziti sigurnost rada proizvoda i dovesti do gubitka jamstva. Naše jamstvo vrijedi u svakom slučaju samo za HANSA-FLEX proizvode. Naši proizvodi se stalno dalje razvijaju i zbog toga su moguće tehničke promjene.