K-DRS MDR 5 M ENTLASTU VENT
»MDR 5« pressure switches, with unloading valve / on/off switch / flange 1/4, without motor protection circuit
Izstrādājuma attēls
![K-DRS MDR 5 M ENTLASTU VENT K-DRS MDR 5 M ENTLASTU VENT](/data/img/product/00003848_0.jpg)
Īpašības
Vielas temperatūra |
-5 °C to +80 °C |
maks. izslēgšanas spiediens |
16 bar |
Slēgšanas daudzums |
5,5 kW |
Kontaktu veids |
NC (3-pole) |
maks. slēgšanas biežums |
120 (electrical), 600 (mechanical) |
Aizsardzības veids |
IP 54 |
Apraksts
Three-phase version
Norāde
G thread acc. to DIN EN ISO 228-1, with ISO flange plate (acc. to ISO 5211)
Citi dati pieejami pēc pieprasījuma.
Izstrādājums
![](/images/up.gif)
šķirot dilstošā secībā
šķirot pieaugošā secībā
![]() |
Saspiestā gaisa pieslēgums | Iestatīšanas diapazons |
---|---|---|
K- 07 30 24 25 | G 1/2 | 2,0 - 11,0 bar |
K- 07 30 24 27 | G 1/2 | 2,5 - 16,0 bar |
Papildu informācija
![](/images/up.gif)
Important: A thermal, 3-pole overcurrent relay must be ordered together with these switches. Without this relay, the on/off mechanism does not work.
Pasūtījuma norādes
For use on devices that have to be vented whenever they are turned off, either because of safety regulations or for technical reasons. The pneumatic devices are disconnected from the system and simultaneously vented each time they are shut off.
Saistību atruna
Neskatoties uz rūpīgu pārbaudi, mēs nevaram izslēgt kļūdas un negarantējam iekļautās informācijas pareizību.
Visa mūsu tiešsaistes katalogā iekļautā informācija balstās uz šobrīd spēkā esošajiem standartiem un profesionālo savienību noteikumiem. Tikai mūsu montāžas noteikumu ievērošana Jums garantēs izstrādājumu drošību. Visu minēto noteikumu neievērošana var negatīvi ietekmēt izstrādājuma funkcionālo drošību un būt par iemeslu mūsu garantijas zaudēšanai. Mūsu garantija jebkurā gadījumā attiecas tikai uz HANSA-FLEX izstrādājumiem. Mūsu izstrādājumi nepārtraukti tiek attīstīti, tādēļ iespējamas tehniskas izmaiņas.