Taal selecteren
Bulgaars (Български)
Chinees (汉语)
Duits (Deutsch)
Engels (English)
Estisch (Eesti)
Frans (Français)
Hongaars (Magyar)
Italiaans (Italiano)
Kroatisch (Hrvatski)
Lets (Latviešu)
Litouws (Lietuvių k.)
Pools (Polski)
Portugees (Português)
Roemeens (Română)
Russisch (Русский)
Servisch (Српска)
Sloveens (Slovenščina)
Slowaaks (Slovenčina)
Spaans (Español)
Tsjechisch (Čeština)
Turks (Türkçe)
PR V4 (M)
Precisiestaalbuis, metrisch, 1.4571
Afbeelding product
Eigenschappen
| Constructie |
Precisiestaalbuis, metrisch |
| Materiaal |
RVS 1.4571 |
| Buislengte |
6 meter |
Aanwijzing
De opgegeven drukwaarden hebben betrekking op rechte buizen.
Bij gebogen buizen dienen de bijbehorende wanddikten analoog aan DIN EN 13480-4 te worden berekend.
Artikel
oplopend sorteren
aflopend sorteren
 Aanduiding |
Ø d2 (mm) |
UD-tolerantie +/- (mm) |
Ø d1 (mm) |
S (mm) |
ID-tolerantie +/- (mm) |
Belastingsvoorbeeld I (bar) |
Belastingsvoorbeeld III (bar) |
|---|---|---|---|---|---|---|---|
| PR 34-2 V4 | 34,0 | - | 30,0 | 2,00 | - | - | - |
| PR 14-1 V4 | 14,0 | - | 12,0 | 1,00 | - | - | - |
| PR 04-0.5 V4 | 4,0 | - | 3,0 | 0,50 | - | - | - |
| PR 04-1 V4 | 4,0 | 0,08 | 2,0 | 1,00 | 0,15 | 600 | 408 |
| PR 05-0.5 V4 | 5,0 | - | 4,0 | 0,50 | - | - | - |
| PR 05-1 V4 | 5,0 | - | 3,0 | 1,00 | - | - | - |
| PR 06-0.5 V4 | 6,0 | 0,08 | 5,0 | 0,50 | 0,15 | - | - |
| PR 06-1 V4 | 6,0 | 0,08 | 4,0 | 1,00 | 0,15 | 400 | 287 |
| PR 06-1.5 V4 | 6,0 | 0,08 | 3,0 | 1,50 | 0,15 | 660 | 442 |
| PR 06-2 V4 | 6,0 | 0,08 | 2,0 | 2,00 | 0,15 | 915 | 575 |
| PR 08-1 V4 | 8,0 | 0,08 | 6,0 | 1,00 | 0,15 | 300 | 222 |
| PR 08-1.5 V4 | 8,0 | 0,08 | 5,0 | 1,50 | 0,15 | 495 | 347 |
| PR 08-2 V4 | 8,0 | 0,08 | 4,0 | 2,00 | 0,15 | 690 | 458 |
| PR 08-2.5 V4 | 8,0 | - | 3,0 | 2,50 | - | - | - |
| PR 10-0.5 V4 | 10,0 | 0,08 | 9,0 | 0,50 | 0,08 | 105 | 81 |
| PR 10-1 V4 | 10,0 | 0,08 | 8,0 | 1,00 | 0,15 | 240 | 181 |
| PR 10-1.2 V4 | 10,0 | - | 7,6 | 1,20 | - | - | - |
| PR 10-1.5 V4 | 10,0 | 0,08 | 7,0 | 1,50 | 0,15 | 396 | 285 |
| PR 10-2 V4 | 10,0 | 0,08 | 6,0 | 2,00 | 0,15 | 552 | 380 |
| PR 10-2.5 V4 | 10,0 | - | 5,0 | 2,50 | - | - | - |
| PR 12-1 V4 | 12,0 | 0,08 | 10,0 | 1,00 | 0,15 | 200 | 152 |
| PR 12-1.5 V4 | 12,0 | 0,08 | 9,0 | 1,50 | 0,15 | 330 | 242 |
| PR 12-2 V4 | 12,0 | 0,08 | 8,0 | 2,00 | 0,15 | 460 | 325 |
| PR 12-3 V4 | 12,0 | 0,08 | 6,0 | 3,00 | 0,25 | 694 | 461 |
| PR 13-1 V4 | 13,0 | - | 11,0 | 1,00 | - | - | - |
| PR 14-1.5 V4 | 14,0 | 0,08 | 11,0 | 1,50 | 0,15 | 283 | 210 |
| PR 14-2 V4 | 14,0 | 0,08 | 10,0 | 2,00 | 0,15 | 394 | 284 |
| PR 14-2.5 V4 | 14,0 | 0,08 | 9,0 | 2,50 | 0,15 | 505 | 353 |
| PR 14-3 V4 | 14,0 | - | 8,0 | 3,00 | - | - | - |
| PR 15-1 V4 | 15,0 | 0,08 | 13,0 | 1,00 | 0,08 | 174 | 134 |
| PR 15-1.5 V4 | 15,0 | 0,08 | 12,0 | 1,50 | 0,15 | 264 | 197 |
| PR 15-2 V4 | 15,0 | 0,08 | 11,0 | 2,00 | 0,15 | 368 | 267 |
| PR 16-1 V 4 | 16,0 | - | 14,0 | 1,00 | - | - | - |
| PR 16-1.5 V4 | 16,0 | 0,08 | 13,0 | 1,50 | 0,08 | 261 | 195 |
| PR 16-2 V4 | 16,0 | 0,08 | 12,0 | 2,00 | 0,15 | 345 | 252 |
| PR 16-2.5 V4 | 16,0 | 0,08 | 11,0 | 2,50 | 0,15 | 442 | 314 |
| PR 16-3 V4 | 16,0 | 0,08 | 10,0 | 3,00 | 0,15 | 540 | 373 |
| PR 16-4 V4 | 16,0 | - | 8,0 | 4,00 | - | - | - |
| PR 18-1 V4 | 18,0 | 0,08 | 16,0 | 1,00 | 0,08 | 145 | 112 |
| PR 18-1.5 V4 | 18,0 | 0,08 | 15,0 | 1,50 | 0,08 | 232 | 175 |
| PR 18-2 V4 | 18,0 | 0,08 | 14,0 | 2,00 | 0,08 | 318 | 234 |
| PR 18-2.5 V4 | 18,0 | 0,08 | 13,0 | 2,50 | 0,15 | 393 | 283 |
| PR 18-3 V4 | 18,0 | - | 12,0 | 3,00 | - | - | - |
| PR 18-4 V4 | 18,0 | - | 10,0 | 4,00 | - | - | - |
| PR 20-1 V 4 | 20,0 | 0,08 | 18,0 | 1,00 | - | - | - |
| PR 20-1.5 V 4 | 20,0 | 0,08 | 17,0 | 1,50 | - | - | - |
| PR 20-2 V4 | 20,0 | 0,08 | 16,0 | 2,00 | 0,08 | 287 | 213 |
| PR 20-2.5 V4 | 20,0 | 0,08 | 15,0 | 2,50 | 0,15 | 354 | 258 |
| PR 20-3 V4 | 20,0 | 0,08 | 14,0 | 3,00 | 0,15 | 432 | 308 |
| PR 20-3.5 V4 | 20,0 | 0,08 | 13,0 | 3,50 | 0,15 | 510 | 355 |
| PR 20-4 V4 | 20,0 | - | 12,0 | 4,00 | - | - | - |
| PR 22-1 V 4 | 22,0 | 0,08 | 20,0 | 1,00 | - | - | - |
| PR 22-1.5 V4 | 22,0 | 0,08 | 19,0 | 1,50 | 0,08 | 190 | 145 |
| PR 22-2 V4 | 22,0 | 0,08 | 18,0 | 2,00 | 0,08 | 260 | 195 |
| PR 22-2.5 V4 | 22,0 | 0,08 | 17,0 | 2,50 | 0,15 | 321 | 236 |
| PR 22-3 V4 | 22,0 | 0,08 | 16,0 | 3,00 | 0,15 | 392 | 283 |
| PR 22-4 V4 | 22,0 | - | 14,0 | 4,00 | - | - | - |
| PR 22-6 V4 | 22,0 | - | 10,0 | 6,00 | - | - | - |
| PR 23-1.5 V4 | 23,0 | - | 20,0 | 1,50 | - | - | - |
| PR 24-4 V4 | 24,0 | - | 16,0 | 4,00 | - | - | - |
| PR 25-1.5 V4 | 25,0 | 0,08 | 22,0 | 1,50 | 0,08 | 167 | 128 |
| PR 25-2 V4 | 25,0 | 0,08 | 21,0 | 2,00 | 0,08 | 229 | 173 |
| PR 25-2.5 V4 | 25,0 | 0,08 | 20,0 | 2,50 | 0,08 | 292 | 216 |
| PR 25-3 V4 | 25,0 | 0,08 | 19,0 | 3,00 | 0,15 | 345 | 252 |
| PR 25-4 V4 | 25,0 | - | 17,0 | 4,00 | - | - | - |
| PR 25-5 V4 | 25,0 | - | 15,0 | 5,00 | - | - | - |
| PR 25-6 V4 | 25,0 | - | 13,0 | 6,00 | - | - | - |
| PR 28-1 V4 | 28,0 | - | 26,0 | 1,00 | - | - | - |
| PR 28-1.5 V4 | 28,0 | 0,08 | 25,0 | 1,50 | 0,08 | 149 | 115 |
| PR 28-2 V4 | 28,0 | 0,08 | 24,0 | 2,00 | 0,08 | 205 | 156 |
| PR 28-2.5 V4 | 28,0 | 0,08 | 23,0 | 2,50 | 0,08 | 260 | 195 |
| PR 28-3 V4 | 28,0 | - | 22,0 | 3,00 | - | - | - |
| PR 28-4 V4 | 28,0 | - | 20,0 | 4,00 | - | - | - |
| PR 28-5 V4 | 28,0 | - | 18,0 | 5,00 | - | - | - |
| PR 30-2 V4 | 30,0 | 0,08 | 26,0 | 2,00 | 0,08 | 191 | 146 |
| PR 30-2.5 V4 | 30,0 | 0,08 | 25,0 | 2,50 | 0,08 | 243 | 183 |
| PR 30-3 V4 | 30,0 | 0,08 | 24,0 | 3,00 | 0,15 | 288 | 214 |
| PR 30-4 V4 | 30,0 | 0,08 | 22,0 | 4,00 | 0,15 | 392 | 282 |
| PR 30-5 V4 | 30,0 | 0,08 | 20,0 | 5,00 | 0,15 | 496 | 347 |
| PR 32-1.5 V4 | 32,0 | - | 29,0 | 1,50 | - | - | - |
| PR 32-2 V4 | 32,0 | - | 28,0 | 2,00 | - | - | - |
| PR 32-2.5 V4 | 32,0 | - | 27,0 | 2,50 | - | - | - |
| PR 32-4 V4 | 32,0 | - | 26,0 | 4,00 | - | - | - |
| PR 32-6 V4 | 32,0 | - | 20,0 | 6,00 | - | - | - |
| PR 35-1.5 V 4 | 35,0 | 0,08 | 32,0 | 1,50 | 0,08 | 119 | 93 |
| PR 35-2 V4 | 35,0 | 0,15 | 31,0 | 2,00 | 0,15 | 151 | 117 |
| PR 35-2.5 V4 | 35,0 | 0,15 | 30,0 | 2,50 | 0,15 | 196 | 149 |
| PR 35-3 V4 | 35,0 | - | 29,0 | 3,00 | - | - | - |
| PR 35-4 V4 | 35,0 | - | 27,0 | 4,00 | - | - | - |
| PR 35-5 V 4 | 35,0 | 0,15 | 25,0 | 5,00 | 0,15 | 418 | 299 |
| PR 38-1.5 V4 | 38,0 | - | 35,0 | 1,50 | - | - | - |
| PR 38-2 V4 | 38,0 | - | 34,0 | 2,00 | - | - | - |
| PR 38-2.6 V4 | 38,0 | - | 32,8 | 2,60 | - | - | - |
| PR 38-3 V4 | 38,0 | - | 32,0 | 3,00 | - | - | - |
| PR 38-4 V4 | 38,0 | 0,15 | 30,0 | 4,00 | 0,15 | 303 | 224 |
| PR 38-5 V4 | 38,0 | 0,15 | 28,0 | 5,00 | 0,15 | 385 | 278 |
| PR 38-6 V4 | 38,0 | - | 26,0 | 6,00 | - | - | - |
| PR 40-2 V4 | 40,0 | - | 36,0 | 2,00 | - | - | - |
| PR 42-2 V4 | 42,0 | 0,20 | 38,0 | 2,00 | 0,20 | 118 | 92 |
| PR 42-3 V4 | 42,0 | 0,20 | 36,0 | 3,00 | 0,20 | 193 | 147 |
| PR 42-6 V4 | 42,0 | - | 30,0 | 6,00 | - | - | - |
| PR 43-1.5 V4 | 43,0 | - | 40,0 | 1,50 | - | - | - |
| PR 50-1.5 V4 | 50,0 | - | 47,0 | 1,50 | - | - | - |
| PR 50-2 V4 | 50,0 | - | 46,0 | 2,00 | - | - | - |
| PR 50-4 V4 | 50,0 | - | 42,0 | 4,00 | - | - | - |
| PR 50-5 V4 | 50,0 | - | 40,0 | 5,00 | - | - | - |
| PR 50-6 V4 | 50,0 | - | 38,0 | 6,00 | - | - | - |
| PR 54-2 V4 | 54,0 | - | 50,0 | 2,00 | - | - | - |
| PR 57-2 V4 | 57,0 | - | 53,0 | 2,00 | - | - | - |
| PR 63.5-1.5 V4 | 63,5 | - | 60,5 | 1,50 | - | - | - |
| PR 64-2 V4 | 64,0 | - | 60,0 | 2,00 | - | - | - |
| PR 70-1.5 V4 | 70,0 | - | 67,0 | 1,50 | - | - | - |
| PR 70-2 V4 | 70,0 | - | 66,0 | 2,00 | - | - | - |
| PR 70-5 V4 | 70,0 | - | 60,0 | 5,00 | - | - | - |
| PR 101.5-2 V4 | 101,5 | - | 97,5 | 2,00 | - | - | - |
| PR 108-3 V4 | 108,0 | - | 102,0 | 3,00 | - | - | - |
| PR 129-2 V4 | 129,0 | - | 125,0 | 2,00 | - | - | - |
| PR 133-4 V4 | 133,0 | - | 125,0 | 4,00 | - | - | - |
| PR 152-2 V4 | 152,0 | - | 148,0 | 2,00 | - | - | - |
| PR 159-4.5 V4 | 159,0 | - | 150,0 | 4,50 | - | - | - |
Extra informatie
Berekening analoog aan DIN 2413 (ontwerp)
Belastingsvoorbeeld I: statisch (tot 100 °C)
Belastingsvoorbeeld III: dynamisch (tot 200 °C) belastingsbereik = P bar
Sterktekengetal: K 234 [N/mm2]
Veiligheidscoëfficiënt: S 1,5
Vermoeiingsgrens: σSch/D 190 [N/mm2]
Toleranties: DIN 10305-4
Rekgrens volgens DIN 10216-5 Rp 1,0 tot 50°C
Aansprakelijkheidsinformatie
Hoewel wij zeer zorgvuldig te werk gaan, kunnen wij fouten niet volledig uitsluiten en daarom niet aansprakelijkheid gesteld worden voor de vermelde gegevens.
Alle gegevens in onze online-catalogus berusten op de normen die momenteel gelden en op de voorschriften van de bedrijfsverenigingen. De productveiligheid is alleen gewaarborgd als u onze montagevoorschriften aanhoudt. Als u zich niet aan alle vermelde voorschriften houdt, kan dat de veilige werking van het product negatief beïnvloeden en ertoe leiden dat de garantie vervalt. Onze garantie geldt uitsluitend voor HANSA-FLEX-producten. Onze producten zijn permanent onderhevig aan nieuwe ontwikkelingen, waardoor technische wijzigingen mogelijk zijn.