3 BKHL LK / 3 BKHS LK
3-way ball valve in block designProduct image
Properties
Connection 1 - 3 |
metric cylindrical outer thread |
Sealing form 1 - 3 |
24° inner cone |
Construction |
Compact construction |
Bore |
L shaped |
Contact travel |
0°; 90° |
Temp. min. |
-10 °C |
Temp. max. |
80 °C |
Material |
Steel housing, ball and operating shaft POM ball seal NBR O-ring |
Surface |
burnished |
Note
Please refer to the operating instructions for ball valves.
Note the permissible pressure limits for the connecting elements.
Item
Sort upwards
Sort downwards
Identification | DN* | Series | for external pipe Ø (mm) |
Connecting thread | Overlap | LW (mm) |
Operating pressure | AF (mm) |
SF* |
---|---|---|---|---|---|---|---|---|---|
3 BKHL 04 LK | 4 | L | 6 | M 12x1,5 | negative (open) | 5,0 | PN 400 | 9 | 1,5 |
3 BKHL 06 LK | 6 | L | 8 | M 14x1,5 | negative (open) | 6,0 | PN 400 | 9 | 1,5 |
3 BKHL 08 LK | 8 | L | 10 | M 16x1,5 | negative (open) | 7,0 | PN 400 | 9 | 1,5 |
3 BKHL 10 LK | 10 | L | 12 | M 18x1,5 | negative (open) | 9,0 | PN 400 | 9 | 1,5 |
3 BKHL 13 LK | 12 | L | 15 | M 22x1,5 | negative (open) | 11,5 | PN 350 | 9 | 1,5 |
3 BKHL 16 LK | 16 | L | 18 | M 26x1,5 | negative (open) | 14,0 | PN 350 | 12 | 1,5 |
3 BKHL 20 LK | 19 | L | 22 | M 30x2 | negative (open) | 18,0 | PN 350 | 14 | 1,5 |
3 BKHL 25 LK | 25 | L | 28 | M 36x2 | negative (open) | 22,0 | PN 350 | 14 | 1,5 |
3 BKHS 04 LK | 4 | S | 8 | M 16x1,5 | negative (open) | 5,0 | PN 400 | 9 | 1,5 |
3 BKHS 06 LK | 6 | S | 10 | M 18x1,5 | negative (open) | 6,0 | PN 400 | 9 | 1,5 |
3 BKHS 08 LK | 8 | S | 12 | M 20x1,5 | negative (open) | 7,0 | PN 400 | 9 | 1,5 |
3 BKHS 10 LK | 10 | S | 14 | M 22x1,5 | negative (open) | 9,0 | PN 400 | 9 | 1,5 |
3 BKHS 13 LK | 12 | S | 16 | M 24x1,5 | negative (open) | 11,5 | PN 350 | 9 | 1,5 |
3 BKHS 16 LK | 16 | S | 20 | M 30x2 | negative (open) | 14,0 | PN 350 | 12 | 1,5 |
3 BKHS 20 LK | 19 | S | 25 | M 36x2 | negative (open) | 18,0 | PN 350 | 14 | 1,5 |
3 BKHS 25 LK | 25 | S | 30 | M 42x2 | negative (open) | 22,0 | PN 350 | 14 | 1,5 |
DN = Nominal diameter, nominal width – Series: LL = Very light L = Light S = Heavy – LW = Clearance – PN = Nominal pressure PB = Max. operating pressure – AF = Width across flats – SF = Safety factor
Spare parts
- BK ANSCHLAG
- Stop washers for ball valve
- BK GEKR GRIFF SW
- Handle (offset) for ball valve
Product versions
This product is also available in the following designs:
- 3 BKHL LK VZ / 3 BKHS LK VZ
- 3-way ball valve in block design, electro galvanised
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.