Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
AFS 90 N (6000 PSI)
SAE screw-in flange, NPT, angle 90°
Product image
Properties
| Pressure series |
6000 psi |
| Standard |
SAE J 518 C ISO 6162 |
| Construction |
Angle 90° |
| Design |
SAE screw-in flange |
| Mounting |
Screw bore hole |
| Scope of supply |
flange only |
| Material |
S355J2G3 (ST52.3) |
| Surface |
black oiled |
Note
The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).
Item
Sort upwards
Sort downwards
 Identification |
PB 10.9 (bar) |
Size | A | Ø B (mm) |
C (mm) |
E (mm) |
F1 (mm) |
H (mm) |
I (mm) |
S1 (mm) |
S2 (mm) |
L (mm) |
M metr. | M unc |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AFS 401/90 N | 400 | 1/2" | NPT 1/2" | 13 | 40,5 | 18,2 | 60 | 16 | 19 | 20 | 37 | 9,0 | M 8 x 30 | 5/16" x 1.1/4" |
| AFS 401/90 N 038 | 400 | 1/2" | NPT 3/8" -18 | 13 | 40,5 | 18,2 | 60 | 16 | 19 | 20 | 37 | 9,0 | M 8 x 30 | 5/16" x 1.1/4" |
| AFS 402/90 N | 400 | 3/4" | NPT 3/4" -14 | 19 | 50,8 | 23,8 | 70 | 19 | 20 | 28 | 43 | 11,0 | M 10 x 35 | 3/8" x 1.1/2" |
| AFS 403/90 N | 400 | 1" | NPT 1" | 25 | 57,2 | 27,8 | 85 | 21 | 22 | 34 | 51 | 13,0 | M 12 x 45 | 7/16" x 1.3/4" |
| AFS 404/90 N | 400 | 1.1/4" | NPT 1.1/4" | 32 | 66,7 | 31,8 | 95 | 25 | 25 | 38 | 56 | *1 | M 14 x 45 | 1/2" x 1.3/4" |
| AFS 405/90 N | 400 | 1.1/2" | NPT 1.1/2" | 38 | 79,4 | 36,5 | 110 | 25 | 28 | 42 | 65 | 17,0 | M 16 x 50 | 5/8" x 2" |
PN = Nominal pressure PB = Max. operating pressure
*1) = 15.0 for metric screws; 13.5 for UNC screws
Product versions
This product is also available in the following designs:
- AFS 90 N M (3000 / 6000 PSI)
- SAE screw-in flange, NPT, angle 90°, with metric screw set and O-ring
- AFS 90 N U (3000 / 6000 PSI)
- SAE screw-in flange, NPT, angle 90°, with UNC screw set and O-ring
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.