Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
W90 HN HJOF VA
Screw-in socket, angle 90°
Product image
Properties
| Connection 1 |
NPT external threads |
| Sealing form 1 |
thread seal |
| Connection 2 |
ORFS external threads |
| Sealing form 2 |
flat seal with O-ring |
| Design |
Screw-in sockets |
| Construction |
Angle 90° |
| Material |
Stainless steel |
Item
Sort upwards
Sort downwards
 Identification |
G1 | G2 | AF (mm) |
OR |
|---|---|---|---|---|
| W90 HN 02 HJOF 04 VA | 1/8" -27 NPT | 9/16"-18 UNF | 14 | 7.65 x 1.78 |
| W90 HN 04 HJOF VA | 1/4" -18 NPT | 9/16"-18 UNF | 14 | 7.65 x 1.78 |
| W90 HN 04 HJOF 06 VA | 1/4" -18 NPT | 11/16" -16 UN | 19 | 9.25 x 1.78 |
| W90 HN 04 HJOF 08 VA | 1/4" -18 NPT | 13/16" -16 UN | 22 | 12.42 x 1.78 |
| W90 HN 06 HJOF VA | 3/8" -18 NPT | 11/16" -16 UN | 19 | 9.25 x 1.78 |
| W90 HN 06 HJOF 08 VA | 3/8" -18 NPT | 13/16" -16 UN | 19 | 12.42 x 1.78 |
| W90 HN 08 HJOF VA | 1/2" -14 NPT | 13/16" -16 UN | 22 | 12.42 x 1.78 |
| W90 HN 08 HJOF 10 VA | 1/2" -14 NPT | 1" -14 UNS | 27 | 15.60 x 1.78 |
| W90 HN 12 HJOF VA | 3/4" -14 NPT | 1.3/16" -12 UN | 30 | 18.77 x 1.78 |
| W90 HN 16 HJOF VA | 1" -11.5 NPT | 1.7/16" -12 UN | 37 | 23.52 x 1.78 |
AF = Width across flats
Ordering information
Seals of NBR
FPM (Viton) on request
Product versions
This product is also available in the following designs:
- W90 HN HJOF
- Screw-in socket, angle 90°, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.