Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
BKHL / BKHS
2-way ball valve in block design
Product image
Properties
| Connection 1 + 2 |
metric cylindrical outer thread |
| Sealing form 1 + 2 |
24° inner cone |
| Contact travel |
0°; 90° |
| Temp. min. |
-20 °C |
| Temp. max. |
60 °C |
| Material |
Steel housing, ball and operating shaft Polyamide ball seal NBR O-ring |
| Surface |
burnished |
Note
Note the permissible pressure limits for the connecting elements.
Please refer to the operating instructions for ball valves.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Series | for external pipe Ø (mm) |
Connecting thread | LW (mm) |
Operating pressure | AF (mm) |
SF* |
|---|---|---|---|---|---|---|---|---|
| BKHL 04 | 4 | L | 6 | M 12x1,5 | 5 | PN 500 | 9 | 1,5 |
| BKHL 06 | 6 | L | 8 | M 14x1,5 | 6 | PN 500 | 9 | 1,5 |
| BKHL 08 | 8 | L | 10 | M 16x1,5 | 8 | PN 500 | 9 | 1,5 |
| BKHL 10 | 10 | L | 12 | M 18x1,5 | 10 | PN 500 | 9 | 1,5 |
| BKHL 13 | 12 | L | 15 | M 22x1,5 | 13 | PN 500 | 9 | 1,5 |
| BKHL 16 | 16 | L | 18 | M 26x1,5 | 13 | PN 500 | 12 | 1,5 |
| BKHL 20 | 19 | L | 22 | M 30x2 | 20 | PN 400 | 14 | 1,5 |
| BKHL 25 | 25 | L | 28 | M 36x2 | 24 | PN 350 | 14 | 1,5 |
| BKHL 32 | 31 | L | 35 | M 45x2 | 24 | PN 350 | 14 | 1,5 |
| BKHL 40 | 38 | L | 42 | M 52x2 | 24 | PN 350 | 14 | 1,5 |
| BKHS 04 | 4 | S | 8 | M 16x1,5 | 5 | PN 500 | 9 | 1,5 |
| BKHS 06 | 6 | S | 10 | M 18x1,5 | 6 | PN 500 | 9 | 1,5 |
| BKHS 08 | 8 | S | 12 | M 20x1,5 | 8 | PN 500 | 9 | 1,5 |
| BKHS 10 | 10 | S | 14 | M 22x1,5 | 10 | PN 500 | 9 | 1,5 |
| BKHS 13 | 12 | S | 16 | M 24x1,5 | 13 | PN 500 | 9 | 1,5 |
| BKHS 16 | 16 | S | 20 | M 30x2 | 15 | PN 500 | 12 | 1,5 |
| BKHS 20 | 19 | S | 25 | M 36x2 | 20 | PN 400 | 14 | 1,5 |
| BKHS 20 - 600 BAR | 19 | S | 25 | M 36x2 | 20 | PN 600 | 14 | 1,5 |
| BKHS 25 | 25 | S | 30 | M 42x2 | 24 | PN 350 | 14 | 1,5 |
| BKHS 25 - 600 BAR | 25 | S | 30 | M 42x2 | 24 | PN 600 | 14 | 1,5 |
| BKHS 32 | 31 | S | 38 | M 52x2 | 24 | PN 350 | 14 | 1,5 |
DN = Nominal diameter, nominal width – Series: LL = Very light L = Light S = Heavy – LW = Clearance – PN = Nominal pressure PB = Max. operating pressure – AF = Width across flats – SF = Safety factor
Spare parts
- BK ANSCHLAG
- Stop washers for ball valve
- BK GEKR GRIFF SW
- Handle (offset) for ball valve
Product versions
This product is also available in the following designs:
- BKHL VZ / BKHS VZ
- 2-way ball valve in block design, electro galvanised
- BKHL VA / BKHS VA
- 2-way ball valve in block design, Stainless steel housing, ball and operating shaft
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.