BOOK VA
Flare connection with 2 O-ringsProduct image
Properties
Design |
Flare connection with 2 O-rings |
Standard |
DIN 3949 |
Scope of supply |
1x union nut, 1x pressure ring, 1x spacer ring |
Material |
Stainless steel |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
Identification | Series | Operating pressure | for external pipe Ø (mm) |
G1 |
---|---|---|---|---|
BOOK NW 04 L VA | L | PN 400 | 6 | M 12 x 1.5 |
BOOK NW 06 L VA | L | PN 400 | 8 | M 14 x 1.5 |
BOOK NW 08 L VA | L | PN 400 | 10 | M 16 x 1.5 |
BOOK NW 10 L VA | L | PN 400 | 12 | M 18 x 1.5 |
BOOK NW 13 L VA | L | PN 400 | 15 | M 22 x 1.5 |
BOOK NW 16 L VA | L | PN 400 | 18 | M 26 x 1.5 |
BOOK NW 20 L VA | L | PN 250 | 22 | M 30 x 2 |
BOOK NW 25 L VA | L | PN 250 | 28 | M 36 x 2 |
BOOK NW 32 L VA | L | PN 250 | 35 | M 45 x 2 |
BOOK NW 40 L VA | L | PN 250 | 42 | M 52 x 2 |
BOOK NW 03 S VA | S | PN 630 | 6 | M 14 x 1.5 |
BOOK NW 04 S VA | S | PN 630 | 8 | M 16 x 1.5 |
BOOK NW 06 S VA | S | PN 630 | 10 | M 18 x 1.5 |
BOOK NW 08 S VA | S | PN 630 | 12 | M 20 x 1.5 |
BOOK NW 10 S VA | S | PN 630 | 14 | M 22 x 1.5 |
BOOK NW 13 S VA | S | PN 400 | 16 | M 24 x 1.5 |
BOOK NW 16 S VA | S | PN 400 | 20 | M 30 x 2 |
BOOK NW 20 S VA | S | PN 400 | 25 | M 36 x 2 |
BOOK NW 25 S VA | S | PN 400 | 30 | M 42 x 2 |
BOOK NW 32 S VA | S | PN 315 | 38 | M 52 x 2 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure
Ordering information
Seals of NBR
FPM (Viton) on request
Product versions
This product is also available in the following designs:
- BOOK
- Flare connection with 2 O-rings, 1x union nut, 1x pressure ring, 1x spacer ring
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.