CHEM EPDM
Chemical supply hose
Product image
![CHEM EPDM CHEM EPDM](/data/img/product/CHEM_EPDM.jpg)
Properties
Application |
chemical industries Sea and industrial waste water |
Special features |
suitable for use as pressure hose in the chemical industry |
Standard |
DIN EN 12115 |
Inner layer |
chemical resistant, black, smooth EPDM rubber |
Insert |
two highly resistant textile inserts and two antistatic copper braids |
Outer layer |
abrasion resistant, flame-retardant, ozone and weather resistant CR rubber |
Colour |
black |
Temp. range |
min. flexible to -35°C max. depending on the medium 95°C Temperature peaks up to 120°C |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
Roll length (m) |
---|---|---|---|---|---|---|---|
CHEM 19-6 EPDM | 3/4" | 19,0 | 31 | 16,0 | 64 | 125 | 40 |
CHEM 25-6 EPDM | 1" | 25,4 | 37 | 16,0 | 64 | 150 | 40 |
CHEM 32-6 EPDM | 1.1/4" | 32,0 | 44 | 16,0 | 64 | 175 | 40 |
CHEM 38-6.5 EPDM | 1.1/2" | 38,0 | 51 | 16,0 | 64 | 225 | 40 |
CHEM 51-8 EPDM | 2" | 50,8 | 67 | 16,0 | 64 | 275 | 40 |
CHEM 63-8 EPDM | 2.1/2" | 63,5 | 79 | 16,0 | 64 | 300 | 40 |
CHEM 76-8 EPDM | 3" | 76,2 | 92 | 16,0 | 64 | 350 | 40 |
CHEM 102-8 EPDM | 4" | 101,6 | 118 | 16,0 | 64 | 450 | 40 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.