Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
CHEM EPDM SD
Chemical supply/suction hose
Product image
Properties
| Application |
chemical industries Sea and industrial waste water |
| Special features |
suitable for use as pressure hose in the chemical industry |
| Standard |
DIN EN 12115 |
| Inner layer |
chemical resistant, black, smooth EPDM rubber |
| Insert |
two highly resistant textile inserts, two steel wire spirals, and two antistatic copper braids |
| Outer layer |
abrasion resistant, flame-retardant, ozone and weather resistant CR rubber |
| Colour |
black |
| Temp. range |
min. flexible to -35°C max. depending on the medium 95°C Temperature peaks up to 120°C |
Item
Sort upwards
Sort downwards
 Identification |
Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Vacuum (bar) |
Min. bending radius (mm) |
Roll length (m) |
|---|---|---|---|---|---|---|---|---|
| CHEM 19-6 EPDM SD | 3/4" | 19,0 | 31 | 16,0 | 64 | 0,9 | 125 | 40 |
| CHEM 25-6 EPDM SD | 1" | 25,4 | 37 | 16,0 | 64 | 0,9 | 150 | 40 |
| CHEM 32-6 EPDM SD | 1.1/4" | 32,0 | 44 | 16,0 | 64 | 0,9 | 175 | 40 |
| CHEM 38-6.5 EPDM SD | 1.1/2" | 38,0 | 51 | 16,0 | 64 | 0,9 | 225 | 40 |
| CHEM 50-7 EPDM SD | 2" | 50,8 | 67 | 16,0 | 64 | 0,9 | 275 | 40 |
| CHEM 63-8 EPDM SD | 2.1/2" | 63,5 | 79 | 16,0 | 64 | 0,9 | 300 | 40 |
| CHEM 76-8 EPDM SD | 3" | 76,2 | 92 | 16,0 | 64 | 0,8 | 350 | 40 |
| CHEM 102-8 EPDM SD | 4" | 101,6 | 118 | 16,0 | 64 | 0,8 | 450 | 40 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.