Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
CHEM UPE SD
Chemical supply/suction hose
Product image
Properties
| Application |
chemical industries |
| Special features |
suitable for use as suction/pressure hose in the chemical industry Phthalate-free tested in accordance with 1907/2006 / EC (REACH) Vacuum-resistant 675 mmHg (26.6 inHg) Type Ω/T in accordance with EN 12115 ( R<106 Ω, R<109 Ω through the hose wall) |
| Standard |
DIN EN 12115 TRbF 131/2 |
| Inner layer |
UHMWPE liner, resistant to chemicals, acids, corrosive media and solvents |
| Insert |
two highly resistant textile inserts, two steel wire spirals, and two antistatic copper braids |
| Outer layer |
abrasion resistant, ozone and weather resistant EPDM rubber |
| Colour |
black with blue/white stripes |
| Temp. min. |
-35 °C |
| Temp. max. |
95 °C |
| Media |
Acids Solvents |
| Approval |
In accordance with FDS21 CFR 177.1520 DM 21.03.73 E SEGUENTI BFR CAT III EUROPEAN REGULATIONS 1935/2004/EC and 10/2011/EC |
Item
Sort upwards
Sort downwards
 Identification |
Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Vacuum (bar) |
Min. bending radius (mm) |
Roll length (m) |
|---|---|---|---|---|---|---|---|---|
| CHEM 13-5 UPE SD | 1/2" | 13,0 | 23,0 | 16,0 | 64 | 0,7 | 130 | 40 |
| CHEM 19-6 UPE SD | 3/4" | 19,0 | 31,0 | 16,0 | 64 | 0,7 | 115 | 40 |
| CHEM 25-6 UPE SD | 1" | 25,4 | 37,0 | 16,0 | 64 | 0,7 | 155 | 40 |
| CHEM 32-6 UPE SD | 1.1/4" | 32,0 | 44,0 | 16,0 | 64 | 0,7 | 200 | 40 |
| CHEM 38-6.5 UPE SD | 1.1/2" | 38,0 | 51,0 | 16,0 | 64 | 0,7 | 240 | 40 |
| CHEM 50-8 UPE SD | 2" | 50,8 | 66,0 | 16,0 | 64 | 0,7 | 330 | 40 |
| CHEM 63-8 UPE SD | 2.1/2" | 63,5 | 79,5 | 16,0 | 64 | 0,7 | 415 | 40 |
| CHEM 76-8 UPE SD | 3" | 75,0 | 91,0 | 16,0 | 64 | 0,7 | 500 | 40 |
| CHEM 102-8 UPE SD | 4" | 102,0 | 118,0 | 16,0 | 64 | 0,7 | 675 | 40 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.