K-SVKM NW 7,2 DREH MS-NI
Quick disconnect couplings DN 7.2, nickel-plated brass, swivel type
Product image
![K-SVKM NW 7,2 DREH MS-NI K-SVKM NW 7,2 DREH MS-NI](/data/img/product/00018169_0.jpg)
Properties
Operating pressure |
0 - 35 bar, maximum static working pressure (non-pulsating) |
Flow rate air |
1.000 l/min (at 6 bar and Δp = 0.5 bar) |
Media temperature |
0 °C to +70 °C |
Housing, sleeve |
Nickel-plated brass |
Valve |
Brass with a bare metal surface |
Spring, snap ring |
Stainless steel 1.4310 |
Locking pins |
Stainless steel 1.4034 |
Sealant |
NBR |
Description
Universal, one-hand quick disconnect couplings, one side sealing, suitable for a wide range of tasks and applications! The closed sleeve protects the coupling from dirt.
In combination with steel plugs, this coupling can also be used for pneumatic tools thanks to its hardened locking pins.
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Connection | Length (mm) |
---|---|---|
K- 07 35 07 28 | Stem 6 mm, swivel type | 74,0 |
K- 07 35 07 29 | Stem 8 mm, swivel type | 74,0 |
K- 07 35 07 30 | Stem 9 mm, swivel type | 74,0 |
K- 07 35 07 31 | Stem, 10 mm, swivel type | 74,0 |
K- 07 35 07 32 | Stem, 13 mm, swivel type | 74,0 |
Additional elements
![](/images/up.gif)
- K-NIPP KUPPL NW7 SCHL MS NI K
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, for hose with swivel nut and kink protector spring
- K-NIPPEL KUPPL NW7 AG MS NI
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, male
- K-NIPPEL KUPPL NW7 IG MS NI
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, female
- K-NIPPEL KUPPL NW7 SCHL MS NI
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, for hose
- K-TUE 7,2 7,8 MS NI
- Stems for couplings DN 7.2 - DN 7.8, nickel-plated brass
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.