Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-SVKM NW 7,2 AG VA
Quick disconnect couplings DN 7.2, stainless steel, male
Product image
Properties
| Operating pressure |
1 - 35 bar and rough vacuum |
| Flow rate air |
1.000 l/min (at 6 bar and Δp = 0.5 bar) |
| Media temperature |
-25 °C to +200 °C |
| Housing, sleeve, valve body |
Stainless steel 1.4305 |
| Spring, snap ring |
Stainless steel 1.4310 |
| Locking pins |
Stainless steel 1.4401 |
| Sealant |
FKM |
Description
Classic standard coupling type, one side sealing, made of stainless steel. The closed sleeve protects the coupling from dirt. We recommend the use of stainless steel plugs and stems!
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Connection | Length (mm) |
AF (mm) |
|---|---|---|---|
| K- 07 35 07 59 | G 1/4 male | 43,0 | 22 |
| K- 07 35 07 60 | G 3/8 male | 43,0 | 22 |
| K- 07 35 07 61 | G 1/2 male | 46,0 | 24 |
Additional elements
- K-NIPPEL KUPPL NW7 AG VA 2
- Plugs for couplings DN 7.2 - DN 7.8, stainless steel 1.4305, male
- K-NIPPEL KUPPL NW7 IG VA 1
- Plugs for couplings DN 7.2 - DN 7.8, stainless steel 1.4305, female
- K-TUE 7,2 7,8 VA 2
- Stems for couplings DN 7.2 - DN 7.8, stainless steel 1.4305
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.