Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-SVKM NW 7,8 SCHL TUE H
Quick disconnect couplings DN 7.8 - for extremely high flow rates, with hose stem
Product image
Properties
| Operating pressure |
0 - 35 bar |
| Flow rate air |
2.100 l/min (at Δp = 0.5 bar) |
| Media temperature |
-20 °C to +40 °C |
| Threaded element |
Nickel-plated brass |
| Valve body |
Steel, QPQ treated |
| Unlocking sleeve |
Extremely robust, ergonomic plastic |
| Valve, Seat |
Brass |
| Media |
Only for clean compressed air |
| Seals |
NBR |
| Spring, snap ring, balls |
stain less steel |
Description
One-hand quick disconnect couplings, one side sealing, that combine high flow rates (approx. twice as high as the popular DN 7.2 standard coupling) with minimal coupling forces. Suitable for all applications with an above-average air requirement!
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Connection | Length (mm) |
AF (mm) |
|---|---|---|---|
| K- 07 35 08 53 | Stem, I.D. 6 | 80,0 | 19 |
| K- 07 35 12 41 | Stem, I.D. 8 | 80,0 | 19 |
| K- 07 35 08 54 | Stem, I.D. 9 | 80,0 | 19 |
| K- 07 35 12 42 | Stem, I.D. 10 | 80,0 | 19 |
| K- 07 35 08 55 | Stem, I.D. 13 | 80,0 | 19 |
Additional elements
- K-NIPP KUPPL NW7 SCHL MS NI K
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, for hose with swivel nut and kink protector spring
- K-NIPPEL KUPPL NW7 AG MS NI
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, male
- K-NIPPEL KUPPL NW7 IG MS NI
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, female
- K-NIPPEL KUPPL NW7 SCHL MS NI
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, for hose
- K-TUE 7,2 7,8 MS NI
- Stems for couplings DN 7.2 - DN 7.8, nickel-plated brass
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.