Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-NIPPEL KUPPL NW7 AG VZ PTFE
Plugs for couplings DN 7.2 - DN 7.8, hardened and galvanised steel, male threaded, FPM (PTFE coated) seal
Product image
Properties
| Operating pressure |
Max. 16 bar |
| Flow rate air |
2.100 l/min (at 6 bar and Δp = 0.5 bar) |
| Media temperature |
-20 °C to +100 °C |
| Material |
hardened zinc plated steel |
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Designation | AF (mm) |
|---|---|---|
| K- 07 35 12 88 | Plug R 1/8 male | 13 |
| K- 07 35 02 49 | Plug R 1/4 male | 14 |
| K- 07 35 02 50 | Plug R 3/8 male | 17 |
| K- 07 35 02 51 | Plug R 1/2 male | 22 |
Additional element for following products
- K-SVKM NW 7,6 AG ST-MS VZ
- Quick disconnect couplings DN 7.6, galvanised steel / brass, male
- K-SVKM NW 7,6 IG ST
- Quick disconnect couplings DN 7.6, galvanised steel / nickel-plated brass, female
- K-SVKM NW 7,6 SCHL TUE ST VZ
- Quick disconnect couplings DN 7.6, galvanised steel / brass, with hose connector
- K-SVKM NW 7,6 STREAM LINE ST
- Quick disconnect couplings DN 7.6, galvanised steel / brass, »stream line«
- K-LKM S NW7,6 AG
- Safety couplings DN 7.6, male
- K-LKM S NW7,6 IG
- Safety couplings DN 7.6, female
- K-LKM S NW7,6 SCHL TUE
- Safety couplings DN 7.6, with hose stem
- K-LKM S NW7,6 STRAEM LINE
- Safety couplings DN 7.6 »stream line«
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.