K-LKM S NW7,8 AG
Safety couplings DN 7.8, maleProduct image
Properties
Operating pressure |
Max. 20 bar |
Flow rate air |
1.400 l/min (at 6 bar and Δp = 0.5 bar) |
Media temperature |
-20 °C to +100 °C |
Connection valve body |
Nickel-plated brass |
Spring, balls |
Stainless-steel |
Sliding sleeve |
Anodised aluminium |
Unlocking sleeve |
Hardened and nickel-plated steel |
Sealant |
NBR |
Description
Safety air relief couplings for gaseous media. Combination of a sliding valve and a quick disconnect coupling! Connection is pressureless. Only a low spring force has to be overcome. Pressure only builds up when the blue sleeve is pushed forward. It is impossible to disconnect the hose either intentionally or inadvertently in this position. When the sliding sleeve is moved back into its home position, the air is relieved from the hose and the coupling can be disconnected.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Connection | Length (mm) |
AF (mm) |
---|---|---|---|
K- 07 35 08 82 | R 1/4 male | 80,0 | 19 |
K- 07 35 08 83 | R 3/8 male | 81,0 | 19 |
K- 07 35 08 84 | R 1/2 male | 87,0 | 22 |
Additional elements
- K-NIPP KUPPL NW7 SCHL MS NI K
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, for hose with swivel nut and kink protector spring
- K-NIPPEL KUPPL NW7 AG MS NI
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, male
- K-NIPPEL KUPPL NW7 IG MS NI
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, female
- K-NIPPEL KUPPL NW7 SCHL MS NI
- Plugs for couplings DN 7.2 - DN 7.8, nickel-plated brass, for hose
- K-TUE 5 MS NI
- Stems for couplings DN 7.2 - DN 7.8, nickel-plated brass
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.