Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TR WT
PA 12 plastic pipe, soft
Product image
Properties
| Application |
Control lines in hydraulics and pneumatics automotive technology laboratories and food industry |
| Special features |
resistant to temperature and weatherproof low weight |
| Inner layer |
Polyamide |
| Insert |
none |
| Outer layer |
Polyamide |
| Colour |
Transparent |
| Temp. min. |
-60 °C |
| Temp. max. |
100 °C |
| Temp. range |
Temperature peaks up to 120°C |
| Media |
Mineral oil Grease Propellants resistant to aqueous acids, alkalis and salts |
Note
From 20 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 20°C / 30° C / 40°C / 50 °C / 60°C / 70°C / 80°C / 90°C / 100°C / 110°C / 120°C
Factor: 1.00 / 0.83 / 0.72 / 0.64 / 0.57 / 0.52 / 0.47 / 0.44 / 0.36 / 0.32 / 0.28
Item
Sort upwards
Sort downwards
 Identification |
Internal Ø (mm) |
External Ø (mm) |
Wall thickness (mm) |
BD* at 20°C (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|
| TR 04-0.5 WT | 3,0 | 4,0 | 0,500 | 19,0 | 20 |
| TR 04-0.65 WT | 2,7 | 4,0 | 0,650 | 26,0 | 20 |
| TR 04-1 WT | 2,0 | 4,0 | 1,000 | 44,0 | 20 |
| TR 05-0.85 WT | 3,3 | 5,0 | 0,850 | 28,0 | 25 |
| TR 05-1 WT | 3,0 | 5,0 | 1,000 | 34,0 | 25 |
| TR 06-1 WT | 4,0 | 6,0 | 1,000 | 27,0 | 30 |
| TR 06-1.5 WT | 3,0 | 6,0 | 1,500 | 45,0 | 30 |
| TR 08-1 WT | 6,0 | 8,0 | 1,000 | 19,0 | 40 |
| TR 08-1.5 WT | 5,0 | 8,0 | 1,500 | 31,0 | 40 |
| TR 08-2 WT | 4,0 | 8,0 | 2,000 | 45,0 | 40 |
| TR 10-1 WT | 8,0 | 10,0 | 1,000 | 15,0 | 60 |
| TR 10-1.25 WT | 7,5 | 10,0 | 1,250 | 19,0 | 60 |
| TR 10-2 WT | 6,0 | 10,0 | 2,000 | 34,0 | 50 |
| TR 12-1 WT | 10,0 | 12,0 | 1,000 | 12,0 | 55 |
| TR 12-1.5 WT | 9,0 | 12,0 | 1,500 | 19,0 | 60 |
| TR 12-2 WT | 8,0 | 12,0 | 2,000 | 27,0 | 60 |
| TR 12.5-1.25 WT | 10,0 | 12,5 | 1,250 | 15,0 | 75 |
| TR 14-1.5 WT | 11,0 | 14,0 | 1,500 | 16,0 | 80 |
| TR 15-1.5 WT | 12,0 | 15,0 | 1,500 | 15,0 | 90 |
| TR 18-2 WT | 14,0 | 18,0 | 2,000 | 16,0 | 100 |
| TR 20-2 WT | 16,0 | 20,0 | 2,000 | 14,0 | 120 |
| TR 22-2 WT | 18,0 | 22,0 | 2,000 | 13,0 | 150 |
| TR 25-2.5 WT | 20,0 | 25,0 | 2,500 | 14,0 | 150 |
| TR 28-2.5 WT | 23,0 | 28,0 | 2,500 | 13,0 | 150 |
| TR 30-2.5 WT | 25,0 | 30,0 | 2,500 | 8,0 | 260 |
BD = Working pressure
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.