Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
KOMP G
Compressor hose
Product image
Properties
| Application |
Mining Compressors |
| Special features |
smooth outer cover |
| Inner layer |
Natural and synthetic rubber |
| Insert |
highly tear-resistant synthetic textile insert |
| Outer layer |
Natural and synthetic rubber, abrasion, ozone and weather resistant |
| Colour |
yellow |
| Temp. min. |
-25 °C |
| Temp. max. |
70 °C |
| Media |
Compressed air |
Item
Sort upwards
Sort downwards
 Identification |
Inches | Internal Ø (mm) |
External Ø (mm) |
Wall thickness (mm) |
Operating pressure (bar) |
Min. bending radius (mm) |
Burst pressure (bar) |
Roll length (m) |
|---|---|---|---|---|---|---|---|---|
| KOMP 13-5 G | 1/2" | 13,0 | 23 | 5,0 | 20,0 | 125 | 60 | 40 |
| KOMP 19-5 G | 3/4" | 19,0 | 29 | 5,0 | 20,0 | 190 | 60 | 40 |
| KOMP 19-6 G | 3/4" | 19,0 | 31 | 6,0 | 20,0 | 190 | 60 | 40 |
| KOMP 25-5.5 G | 1" | 25,4 | 36 | 5,5 | 20,0 | 254 | 60 | 40 |
| KOMP 25-7 G | 1" | 25,4 | 39 | 7,0 | 20,0 | 254 | 60 | 40 |
| KOMP 32-6 G | 1.1/4" | 32,0 | 44 | 6,0 | 20,0 | 260 | 60 | 40 |
| KOMP 38-5 G | 1.1/2" | 38,0 | 48 | 5,0 | 20,0 | 380 | 60 | 40 |
| KOMP 38-7 G | 1.1/2" | 38,0 | 52 | 7,0 | 20,0 | 380 | 60 | 40 |
| KOMP 51-7.5 G | 2" | 50,8 | 66 | 7,5 | 20,0 | 510 | 60 | 40 |
| KOMP 63-10 G | 2.1/2" | 63,5 | 84 | 10,0 | 20,0 | 480 | 60 | 40 |
| KOMP 75-9 G | 3" | 76,2 | 92 | 9,0 | 20,0 | 762 | 60 | 40 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.