Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-MANO ABSPH ZAPF SPAN MUF
Pressure gauge stopcocks, male - female/female
Product image
Properties
| Application |
For all pressure gauges with a flat gasket acc. to DIN 16258 |
| Pressure range |
Max. 16 bar, depending on the variantPressure gauge valves should be used for higher pressures |
| Temperature |
Max. +50 °C |
| Housing |
Brass with a bare metal surface or stainless steel 1.4571 |
| Handle |
Plastic |
| Test flange |
- |
Description
It is useful to install a stopcock as a shut-off element between the pressure gauge and the pipe. When the lever is set to the »blow out« position, the medium is discharged into the atmosphere. Stopcocks with a test port allow pressure gauges to be simultaneously connected to the pipe.
Note
K-07201090, K-07201091 in acc. with DIN 16261-A, K-07201096, K-07201097 in acc. with DIN 16261-B
K-07201128, K-07201129 in acc. with DIN 16262-A, K-07201127 in acc. with DIN 16262-B
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | PN (bar) | AF (mm) |
Material |
|---|---|---|---|---|
| K- 07 20 11 27 | G 1/4 | 6 | 17 | Brass |
| K- 07 20 11 29 | G 1/2 | 25 | 27 | Brass |
| K- 07 20 11 28 | G 1/2 | 25 | 27 | Stainless steel |
| K- 07 20 11 31 | G 1/2 | 25 | 27 | Brass |
| K- 07 20 11 30 | G 1/2 | 25 | 27 | Stainless steel |
| K- 07 20 11 32 | G 1/2 | 25 | 27 | Brass |
Additional information
Further measuring ranges on request
Version for panel mounting available on request. Version with max. pointer available on request
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.