Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-KFMM H MBAR
Capsule-type pressure gauges, connection on rear
Product image
Properties
| Type |
611.10 (Ø 63), 612.20 (Ø 100) |
| Design |
Capsule-type pressure gauge |
| Application |
For gaseous, dry, non-corrosive media |
| Accuracy class |
1,6 |
| Media temperature |
max. +100 °C; max. +80 °C (at type Ø 100 mm, rear connector excentric) |
| Ambient temperature |
-20 °C to +60 °C |
| Housing |
Steel, black (Ø 63 mm)CrNi steel (Ø 100 mm) |
| Measuring element and movement |
Copper alloy |
| Inspection glass |
Plexiglass (Ø 63 mm), flat instrument glass (Ø 100 mm) |
Description
With zero correction
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Measuring range | Ø (mm) |
Connection |
|---|---|---|---|
| K- 07 20 06 97 | 0 - 40 mbar | 63,0 | G 1/4" |
| K- 07 20 06 98 | 0 - 60 mbar | 63,0 | G 1/4" |
| K- 07 20 06 99 | 0 - 100 mbar | 63,0 | G 1/4" |
| K- 07 20 07 00 | 0 - 160 mbar | 63,0 | G 1/4" |
| K- 07 20 07 01 | 0 - 250 mbar | 63,0 | G 1/4" |
| K- 07 20 07 02 | 0 - 400 mbar | 63,0 | G 1/4" |
| K- 07 20 01 25 | 0 - 25 mbar | 100,0 | G 1/2" |
| K- 07 20 01 26 | 0 - 40 mbar | 100,0 | G 1/2" |
| K- 07 20 01 27 | 0 - 60 mbar | 100,0 | G 1/2" |
| K- 07 20 01 28 | 0 - 100 mbar | 100,0 | G 1/2" |
| K- 07 20 01 29 | 0 - 160 mbar | 100,0 | G 1/2" |
| K- 07 20 01 30 | 0 - 250 mbar | 100,0 | G 1/2" |
| K- 07 20 01 31 | 0 - 400 mbar | 100,0 | G 1/2" |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.