K-T-STUECKE IG IG AG 2 2
Tees, female-female-male
Product image
![K-T-STUECKE IG IG AG 2 2 K-T-STUECKE IG IG AG 2 2](/data/img/product/00006776_0.jpg)
![K-T-STUECKE IG IG AG 2 2 - data/img/product/00042745_0.gif data/img/product/00042745_0.gif - K-T-STUECKE IG IG AG 2 2](/data/img/product/00042745_0.gif)
Properties
Operating pressure |
60 bar |
Operating temperature |
Max. 150 °C |
Female thread |
Parallel to DIN EN ISO 228-1 |
Material |
Brass with a bare metal surface |
Male thread |
conical acc. DIN 2999 |
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Thread | L1 (mm) |
L2 (mm) |
AF |
---|---|---|---|---|
K- 07 40 11 70 | G/R 1/8 | 39,5 | 21,0 | 10 mm |
K- 07 40 11 71 | G/R 1/4 | 49,0 | 23,5 | 13 mm |
K- 07 40 11 72 | G/R 3/8 | 54,0 | 28,0 | 17 mm |
K- 07 40 11 73 | G/R 1/2 | 64,5 | 33,5 | 21 mm |
K- 07 40 11 74 | G/R 3/4 | 69,5 | 36,5 | 25 mm |
K- 07 40 11 75 | G/R 1 | 84,0 | 45,0 | 30 mm |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.