K-XRD STECKANSCHLUSS Z SCH AGR OR
Straight non-return valves, flow direction from port to tube, parallel male thread with O-ringProduct image
Properties
Working pressure |
Max. 10 bar, vacuum |
Application |
Air, vacuum |
Recommended hoses |
PU or PA (nylon) |
Media |
Compressed air |
Standard |
M thread acc. to DIN 13-1, with O-Ring G thread acc. to DIN EN ISO 228-1, with O-Ring |
Temp. range |
0 °C to +60 °C |
Sealing surface |
O-ring (NBR) |
Material |
Plastic, Nickel plated brass |
Contact pressure ring |
Plastic |
Description
The non-return function of these push-in fittings prevents the air from flowing back. the unidirectional design means air flow is only possible in one direction. These valves are available with air flow from the port to the tube or from the tube to the port.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | for external hose Ø | L1 (mm) |
Opening pressure (bar) |
AF |
---|---|---|---|---|---|
K- 07 40 08 73 | M 5 | 4 mm | 31,0 | 0,2 | 10 mm |
K- 07 40 08 68 | G 1/8 | 4 mm | 24,2 | 0,2 | 14 mm |
K- 07 40 08 69 | G 1/8 | 6 mm | 31,0 | 0,2 | 14 mm |
K- 07 40 08 70 | G 1/8 | 8 mm | 32,8 | 0,2 | 14 mm |
K- 07 40 08 66 | G 1/4 | 6 mm | 33,0 | 0,2 | 17 mm |
K- 07 40 08 67 | G 1/4 | 8 mm | 34,8 | 0,2 | 17 mm |
K- 07 40 08 71 | G 3/8 | 10 mm | 41,0 | 0,2 | 20 mm |
K- 07 40 08 72 | G 3/8 | 12 mm | 42,5 | 0,2 | 21 mm |
K- 07 40 08 64 | G 1/2 | 10 mm | 43,0 | 0,2 | 24 mm |
K- 07 40 08 65 | G 1/2 | 12 mm | 44,5 | 0,2 | 24 mm |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.