K-DRG MULTIFIX MINI
Pressure regulatorsProduct image
Properties
Input pressure |
Max. 16 bar |
Media temperature |
max. 60 °C |
Ambient temperature |
Max. 60 °C |
Sealant |
NBR |
Spring bonnet |
POM-brass |
Housing |
Die-cast zinc |
Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design. The pressure setting can be locked by pushing the button down.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN | Size |
---|---|---|---|---|---|---|---|---|---|
K- 07 25 00 03 | G 1/8 | 0.1 - 3 bar | 1100 | 40,0 | 85.0 mm | 63,0 | 22,0 | 5 | 0 |
K- 07 25 00 04 | G 1/8 | 0.2 - 6 bar | 1100 | 40,0 | 85.0 mm | 63,0 | 22,0 | 5 | 0 |
K- 07 25 00 01 | G 1/8 | 0.5 - 10 bar | 1100 | 40,0 | 85.0 mm | 63,0 | 22,0 | 5 | 0 |
K- 07 25 00 02 | G 1/8 | 0.5 - 16 bar | 1100 | 40,0 | 85.0 mm | 63,0 | 22,0 | 5 | 0 |
K- 07 25 00 05 | G 1/4 | 0.1 - 3 bar | 1100 | 40,0 | 85.0 mm | 63,0 | 22,0 | 5 | 0 |
K- 07 25 00 06 | G 1/4 | 0.2 - 6 bar | 1100 | 40,0 | 85.0 mm | 63,0 | 22,0 | 5 | 0 |
K- 07 25 00 07 | G 1/4 | 0.5 - 10 bar | 1100 | 40,0 | 85.0 mm | 63,0 | 22,0 | 5 | 0 |
Ordering information
Lockable pressure regulators: K-07250001 and K-07250007 (prices on request). If several devices in the »multifix-mini« Series are assembled together, the maximum working pressure is 12 bar.
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-SCHALTTAFELMUTTER
- Nut
- K-KOPPELPAKET MEHR
- Coupling packet
- K-VERSCHLEI-SATZ
- Set of wearing parts
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.