Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-WTEH 2-TLG PC MULTIFIX MINI
Service units, 2-piece with polycarbonate bowl
Product image
Properties
| Input pressure |
Max. 12 bar (also for metal tank!) |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Pore size in filter element |
5 μm |
| Sealant |
NBR |
| Spring bonnet |
POM-brass |
| Housing |
Die-cast zinc |
| Dropper |
PA (polycarbonate bowl), Zinc-glass-NBR (metal bowl) |
| Drain valve |
Semi-automatic |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Two or three-piece service units consisting of a diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN | Size |
|---|---|---|---|---|---|---|---|---|---|
| K- 07 25 01 25 | G 1/8 | 0.5 - 10 bar | 700 | 80,0 | 165.5 mm | 63,0 | 102,5 | 5 | 0 |
| K- 07 25 01 27 | G 1/4 | 0.5 - 10 bar | 700 | 80,0 | 165.5 mm | 63,0 | 102,5 | 5 | 0 |
Ordering information
Lockable service units available on request. If several devices in the »multifix-mini« Series are assembled together, the maximum working pressure is 12 bar.
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-AUTOMAT ABLASSVENTIL
- Automatic drain valve
- K-SCHALTTAFELMUTTER
- Nut
- K-KOPPELPAKET MEHR
- Coupling packet
- K-PC-BEHAELTER FILTER MULTIFIX
- Polycarbonate tank filter
- K-ERSATZBEHAELTER MULTI MINI
- Spare tank »multifix-mini« & »standard-mini«
- K-FILTERELEMENT
- Filter element
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-TROPFAUFSATZ POLYCARBO 1
- Drip attachment polycarbonate
- K-TROPFAUFSATZ METALL
- Drip attachment metal
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.