Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRG STANDARD-MINI
Pressure regulators
Product image
Properties
| Input pressure |
Max. 28 bar |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Sealant |
NBR/TPU |
| Spring bonnet |
POM-brass |
| Housing |
Die-cast zinc, painted silver |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
| More information |
User manual on request |
Description
Reversible diaphragm pressure regulators with self-relieving design in compact design. The pressure setting can be locked by pushing the knob down.
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN |
|---|---|---|---|---|---|---|---|---|
| K- 07 25 03 22 | G 1/8 | 0.15 - 3.5 bar | 340 | 43,0 | 72.5 mm | 9,5 | 63,0 | 5 |
| K- 07 25 03 23 | G 1/8 | 0.2 - 7.0 bar | 340 | 43,0 | 72.5 mm | 9,5 | 63,0 | 5 |
| K- 07 25 03 24 | G 1/8 | 0.5 - 10.0 bar | 340 | 43,0 | 72.5 mm | 9,5 | 63,0 | 5 |
| K- 07 25 03 25 | G 1/4 | 0.15 - 3.5 bar | 340 | 43,0 | 72.5 mm | 9,5 | 63,0 | 5 |
| K- 07 25 03 26 | G 1/4 | 0.2 - 7.0 bar | 340 | 43,0 | 72.5 mm | 9,5 | 63,0 | 5 |
| K- 07 25 03 27 | G 1/4 | 0.5 - 10.0 bar | 340 | 43,0 | 72.5 mm | 9,5 | 63,0 | 5 |
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-SCHALTTAFELMUTTER
- Nut
- K-LOESBARE DOPPELNIPPEL MS
- Double nipples
- K-XV AGM MS NI
- Double nipples, parallel male thread, nickel-plated brass
- K-VERSCHLEI-SATZ
- Set of wearing parts
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.