Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRG DRVS MULTIFIX
Pressure regulators with pressure supply at both ends
Product image
Properties
| Input pressure |
Max. 16 bar |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Sealant |
NBR |
| Spring bonnet |
POM-brass |
| Housing |
Die-cast zinc |
| Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Diaphragm pressure regulators with self-relieving design for mounting side by side. The pressure setting can be locked by pushing the knob down.
By assembling two or more controllers together, it is possible to supply several working air circuits with different output pressures via a single supply line.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN | Size |
|---|---|---|---|---|---|---|---|---|---|
| K- 07 25 00 31 | G 1/4 | 0.1 - 3 bar | 2000 | 47,8 | 94.8 mm | 67,0 | 27,8 | 6 | 1 |
| K- 07 25 00 32 | G 1/4 | 0.2 - 6 bar | 2000 | 47,8 | 94.8 mm | 67,0 | 27,8 | 6 | 1 |
| K- 07 25 00 30 | G 1/4 | 0.5 - 10 bar | 2000 | 47,8 | 94.8 mm | 67,0 | 27,8 | 6 | 1 |
| K- 07 25 00 34 | G 1/2 | 0.1 - 3 bar | 5500 | 68,8 | 134.1 mm | 99,0 | 35,1 | 15 | 2 |
| K- 07 25 00 35 | G 1/2 | 0.2 - 6 bar | 5500 | 68,8 | 134.1 mm | 99,0 | 35,1 | 15 | 2 |
| K- 07 25 00 33 | G 1/2 | 0.5 - 10 bar | 5500 | 68,8 | 134.1 mm | 99,0 | 35,1 | 15 | 2 |
Ordering information
The port for the output pressure (P2) is on the rear! K-07250031: G 1/4, K-07250034: G 1/2. Lockable pressure regulators K-07250030 available on request.
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-SCHALTTAFELMUTTER
- Nut
- K-HALTERBAUSATZ MULTIFIX
- Holder
- K-KOPPELPAKET MEHR
- Coupling packet
- K-KOPPELPAKET SCHMA
- Coupling packet
- K-VERSCHLEI-SATZ
- Set of wearing parts
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.