Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-ANSCHLUSSNIP FLACHSAUG AG
Connection nipples for flat suction pads
Product image
Properties
| For suction paddiameter |
20 mm |
Note
Mini-sensor with housing and connection cable, analogue or digital output signal. Minimum size and low weight combined with high measuring accuracy.
Item
Sort upwards
Sort downwards
 Identification |
Thread | Length (mm) |
DN |
|---|---|---|---|
| K- 07 45 00 15 | M 5 male | 5,0 | 2,0 |
| K- 07 45 00 16 | G 1/4 male | 5,0 | 5,5 |
| K- 07 45 00 17 | G 1/8 male | 3,0 | 2,0 |
| K- 07 45 00 18 | G 1/8 male | 5,0 | 2,0 |
| K- 07 45 00 19 | G 1/8 male | 5,0 | 2,0 |
| K- 07 45 00 20 | G 1/8 male | 4,5 | 2,4 |
| K- 07 45 00 21 | G 1/8 male | 5,0 | 2,4 |
Additional information
Socket connectors suitable for vacuum (»click-clock« series) see pageAll PA/PE/PU hoses up to size 12 x 9 mm are suitable for vacuum. See page
Accessory for following products
- K-FLACHSAUGER RUND NBR
- Flat suction pads, round, material NBR
- K-FLACHSAUGER RUND SILIKON
- Flat suction pads, round, material silicone
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.