Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-3 BKR T VA
3-way ball valves, T-bore
Product image
Properties
| Operating pressure |
max. 63 bar |
| Operating temperature |
max. 160 °C |
| Bore |
T shaped |
| Recommended values |
Up to 40 °C: 63 bar, 150 °C: 28 bar |
| Seal |
RTFE |
| Hand lever |
Stainless steel |
| Ball valve |
Stainless steel 1.4408 |
Description
With T-bore, reduced bore. Version for sealing on all sides with integrated ISO flange plate (ISO 5211). The lever can be turned 360° to allow several switching variants.
Note
G thread acc. to DIN EN ISO 228-1, with ISO flange plate (acc. to ISO 5211)
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
DN | Thread | A (mm) |
B (mm) |
L (mm) |
Ø D (mm) |
|---|---|---|---|---|---|---|
| K- 07 30 15 10 | 15 | G 1/2 | 114,0 | 73,0 | 80,0 | 12,5 |
| K- 07 30 15 11 | 20 | G 3/4 | 133,0 | 78,0 | 87,0 | 16,0 |
| K- 07 30 15 12 | 25 | G 1 | 133,0 | 83,0 | 100,0 | 20,0 |
| K- 07 30 15 13 | 32 | G 1 1/4 | 187,0 | 92,0 | 123,0 | 25,0 |
| K- 07 30 15 14 | 40 | G 1 1/2 | 187,0 | 98,0 | 142,0 | 31,8 |
| K- 07 30 15 15 | 50 | G 2 | 187,0 | 126,0 | 170,0 | 38,1 |
Ordering information
For use on devices that have to be vented whenever they are turned off, either because of safety regulations or for technical reasons. The pneumatic devices are disconnected from the system and simultaneously vented each time they are shut off.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.