Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-SSV VA
Angle-seat valves with piston actuator
Product image
Properties
| Differential pressure |
0 - 16 bar |
| Media temperature |
-10 °C to +180 °C |
| Control air port |
G 1/8 |
| Pilot fluid temperature |
max. +60 °C |
| Ambient temperature |
-20 °C to +70 °C |
| permissible static pressure |
Max. 16 bar |
| Valve housing |
Stainless steel AISI 316 |
| Connection piece |
Stainless steel |
| Operator |
Polyamide (glass fibre-reinforced) |
| Piston |
Nickel-plated brass (DN 15 to DN 32), PBT + GF 30% (DN 40 to DN 50) |
| Spindle |
Stainless steel |
| Sealant |
PTFE |
Description
Angle-seat valves with external pilot control and a self-aligning valve discfor neutral (bronze body) or corrosive (stainless steel body) media. Very high flow due to angled seat design, Water hammer prevented by fluid entry under the disc, Suitable for vacuum operation (low vacuum), NAMUR interface on the piston actuator. 3/2 and 5/2-way valves can be mounted directly.
Note
G thread acc. to DIN EN ISO 228-1, with ISO flange plate (acc. to ISO 5211)
For use on devices that have to be vented whenever they are turned off, either because of safety regulations or for technical reasons. The pneumatic devices are disconnected from the system and simultaneously vented each time they are shut off.
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
A (mm) |
C (mm) |
F (mm) |
Thread | max. operating differential pressure difference (bar) |
min. control pressure | max. control pressure |
|---|---|---|---|---|---|---|---|
| K- 07 30 25 33 | 190,0 | 169,0 | 85,0 | G 1/2 | 16 | 4 | 10 |
| K- 07 30 25 34 | 195,0 | 176,0 | 95,0 | G 3/4 | 10 | 4 | 10 |
| K- 07 30 25 35 | 213,0 | 195,0 | 95,0 | G 3/4 | 16 | 4 | 10 |
| K- 07 30 25 36 | 219,0 | 202,0 | 105,0 | G 1 | 11 | 4 | 10 |
Additional information
Other versions e.g. for steam on request
Information on max. operating differential pressures apply for air, gas, corrosive aggressive media, water
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.