K-BKR ECKFORM AG AG
Ball valves, angle type, male/male threadProduct image
Properties
Application |
Gas, compressed air, water, oil, weak alkaline solutions |
Operating pressure |
Liquids: 40/32 bar depending on the port size; Gas: max. 5 bar (MOP 5) |
Operating temperature |
-15 °C to +100 °C for liquids; -15 °C to +60 °C for gas |
Thread description |
R or RP thread acc. to ISO 7-1 |
Housing, internal parts |
Nickel-plated brass |
Lever |
Aluminium, painted yellow |
Ball seals |
PTFE |
Stem seal |
NBR |
Note
Further information on request
Item
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.