Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-ZFL ABSP-KLAPPEN DOPPEL
Butterfly valves, with double-acting actuator, min. pilot pressure 5 bar
Product image
Properties
| Design |
Pneumatic actuators, in double- or single acting version |
| Operating pressure |
Max. 16 bar |
| Operating temperature |
-15 °C to +120 °C |
| Media |
Water / steam, salt water, salt water, ester, ketone, alkali, caustic soda, sodium hydroxide. Not recommended for hydrocarbons |
| Pilot pressure |
5.5 bar |
| Valve adapter |
Supplied as standard, operated by a 3/2- or 5/2-way valve |
| Angle of rotation |
90 ° |
| Drive |
aluminium eloxed |
| Drive seal |
NBR |
| Housing |
Grey cast iron GG25 epoxy resin coated, RAL 5015 |
| Seal |
EPDM |
| Shaft |
SS416 |
| Shaft seal |
EPDM |
| Piloting |
|
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Washer | DN | B (mm) |
H1 (mm) |
H2 (mm) |
H3 (mm) |
L (mm) |
|---|---|---|---|---|---|---|---|
| K- 07 30 03 28 | Stainless Steel CF8M/1.4404 | 40 | 38,0 | 68,0 | 108,0 | 212,0 | 94,0 |
| K- 07 30 03 29 | Stainless Steel CF8M/1.4404 | 50 | 47,0 | 71,0 | 143,0 | 247,0 | 100,0 |
| K- 07 30 03 30 | Stainless Steel CF8M/1.4404 | 65 | 49,0 | 78,0 | 155,0 | 259,0 | 115,0 |
| K- 07 30 03 31 | Stainless Steel CF8M/1.4404 | 80 | 47,0 | 89,0 | 162,0 | 280,0 | 127,0 |
| K- 07 30 03 32 | Stainless Steel CF8M/1.4404 | 100 | 56,0 | 102,0 | 178,0 | 308,0 | 163,0 |
| K- 07 30 03 33 | Stainless Steel CF8M/1.4404 | 125 | 59,0 | 123,0 | 191,0 | 321,0 | 190,0 |
| K- 07 30 03 35 | Stainless Steel CF8M/1.4404 | 150 | 59,0 | 138,0 | 205,0 | 352,0 | 216,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.