K-SPV EINFACH
Check valves, single-acting - spring to close
Product image
![K-SPV EINFACH K-SPV EINFACH](/data/img/product/00011850_0.jpg)
![K-SPV EINFACH - data/img/product/00042444_0_neu.jpg data/img/product/00042444_0_neu.jpg - K-SPV EINFACH](/data/img/product/00042444_0_neu.jpg)
Properties
Operating pressure |
Max. 10 bar |
Pilot pressure |
min. 3.0 bar, max. 8 bar with double-acting actuator; min. 4.2 bar, max. 8 bar for single-drive |
Temperature |
-20 °C to +80 °C (NBR); -20 °C to +150 °C (FKM) |
Connection |
NAMUR-Interface, direct: 2 x G 1/8 |
Installation position |
Any |
Housing, internal parts |
Nickel-plated brass |
Spring |
Stainless-steel |
Sealant |
Perbunan (NBR) or FKM (FPM) |
Description
2/2-way check valves, specially designed for automated industrial plant engineering. A low-price, compact, space-saving and reliable alternative to ball valves with a pneumatic rotary actuator.
These valves have a full bore.
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN | Thread | Sealant | H (mm) |
L (mm) |
---|---|---|---|---|---|
K- 07 30 25 45 | 10 | Rp 3/8 | NBR | 46,0 | 98,0 |
K- 07 30 25 46 | 15 | Rp 1/2 | NBR | 51,7 | 112,0 |
K- 07 30 25 47 | 20 | Rp 3/4 | NBR | 63,5 | 135,0 |
K- 07 30 25 48 | 25 | Rp 1 | NBR | 69,0 | 143,0 |
K- 07 30 25 49 | 10 | Rp 3/8 | FKM | 46,0 | 98,0 |
K- 07 30 25 50 | 15 | Rp 1/2 | FKM | 51,7 | 112,0 |
K- 07 30 25 51 | 20 | Rp 3/4 | FKM | 63,5 | 135,0 |
K- 07 30 25 52 | 25 | Rp 1 | FKM | 69,0 | 143,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.