K-DRS W DREHBAR
Pressure switches, changeover type, turnableProduct image
Properties
Design |
Spring-loaded diaphragm (NBR) |
Application |
Air, hydraulic oil, oil emulsions, water |
Ambient temperature |
-25 °C to +85 °C |
Electrical connection |
Coupling plug Pg 9, DIN 43650 |
Switching frequency |
200/min. |
Rated voltage |
250 V |
Operating principle |
Changeover |
Material |
Galvanised steel |
Description
For liquid, non-corrosive and gaseous media. Easy to adjust, even under pressure. Can be integrated in any mounting position. Pressure adjustment by means of a hexagon-head screw.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | Adjustment range |
---|---|---|
K- 07 30 28 55 | G 1/8 | 0,3 - 2,0 bar |
K- 07 30 28 56 | G 1/8 | 1,0 - 10,0 bar |
K- 07 30 28 57 | G 1/8 | 10,0 - 70,0 bar |
K- 07 30 28 58 | G 1/4 | 0,3 - 2,0 bar |
K- 07 30 28 59 | G 1/4 | 1,0 - 10,0 bar |
K- 07 30 28 60 | G 1/4 | 10,0 - 70,0 bar |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.