Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-MV 3/2 BANJO
Solenoid valves
Product image
Properties
| Media temperature |
max. +60 °C |
| Connection |
Port 1: Plug connection for hose outside Ø 4 mm; Port 2: G 1/8 thread; Relief port 3: M 5 thread |
| electric variant |
acc. france norm NF C79300 |
| Operating pressure |
Max. 10 bar |
| Operating temperature |
max. +60 °C |
| Housing |
Polyamide (glass fibre-reinforced) |
| Seal |
Perbunan (NBR) |
Description
Compact solenoid valves for mounting directly on the actuator (single-acting cylinder, valve, etc.). Optimum installation Supply port (1), solenoid valve body, coil and cable socket can be rotated 360°, Manual operator, Exhaust air restrictor available on
Note
Further information on request
Item
Identification Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.