Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-MV O D 230 V, 50 - 60 HZ 1
Normally open, directly operated, 230 V, 50 to 60 Hz
Product image
Properties
| Electrical connection |
ISO 4400. cable socket (Pg 11P) |
| Protection IP |
IP65 (with connector socket fitted) |
| Media temperature |
max. +80 °C with Perbunan-seal; max. +130 °C with FKM-Seal |
| Thread description |
G-thread acc. to DIN EN ISO 228-1, Rp-thread acc. to ISO 7-1 |
| Housing, valve seat |
Brass |
| Internal parts |
Stainless steel |
| Seal |
Perbunan (NBR) or FKM |
Description
Standard series, proven over many years, available in three different versions: Directly operated, Combined operation, Pilot-operated. For all applications with compressed air, neutral gases or low-viscosity, neutral media.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Max. working pressure (bar) |
DN | Sealant | A (mm) |
B (mm) |
Type |
|---|---|---|---|---|---|---|---|
| K- 07 30 23 62 | Rp 1/8 | 20 | 2,4 | NBR | 75,0 | 33,0 | 7 |
| K- 07 30 23 64 | Rp 1/8 | 20 | 2,4 | FKM | 75,0 | 33,0 | 1 |
| K- 07 30 23 63 | G 1/4 | 9 | 3,2 | NBR | 80,0 | 40,0 | 2 |
| K- 07 30 23 65 | G 1/4 | 9 | 3,2 | FKM | 80,0 | 40,0 | 2 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.