Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-MV G (NC) D 230 V, 50 HZ H
Normally closed, (NC), directly operated, 230 V, 50 Hz, for high pressures
Product image
Properties
| Electrical connection |
device socket type A in acc. with ISO 4400 for all valves with threads G 3/8 & G 1/2, except valves type 3 & 4. Device socket |
| Protection IP |
IP 65 |
| Media temperature |
max. 80 °C when using water or oils; max. 90 °C when using with air |
| Thread description |
G thread acc. DIN EN ISO 228-1 |
| Housing, valve seat |
Brass |
| Internal parts |
Stainless steel |
| Seal |
FPM |
Description
Standard series in two different versions: Directly operated, Pilot-operated. For all applications with compressed air, neutral gases or low-viscosity, neutral media.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Max. working pressure (bar) |
DN | A (mm) |
B (mm) |
C (mm) |
Type |
|---|---|---|---|---|---|---|---|
| K- 07 30 01 60 | G 1/8 | 30 | 1,5 | 70,0 | 40,0 | 70,7 | 1 |
| K- 07 30 01 61 | G 1/4 | 30 | 1,5 | 70,0 | 40,0 | 70,7 | 1 |
| K- 07 30 01 62 | G 3/8 | 30 | 3,0 | 85,0 | 52,0 | 87,0 | 1 |
| K- 07 30 01 63 | G 1/2 | 30 | 3,0 | 85,0 | 52,0 | 87,0 | 1 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.