SKM HL 3 U
Plug-in coupling sleeve
Product image
![SKM HL 3 U SKM HL 3 U](/data/img/product/SKM_HL_U_neu.jpg)
Properties
Application |
Automotive engineering (UNIMOG) |
Connection 1 |
metric cylindrical outer thread |
Sealing form 1 |
24° inner cone |
Standard |
complies with ISO 7241 series A |
Material |
Steel |
Surface |
electro galvanised |
Description
The double acting sliding sleeve provides a push/pull function when coupling.
Plug-in couplings allow quick coupling.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN* | Series | for external pipe Ø (mm) |
Connecting thread | Size | Operating pressure (bar) |
SF coup.* | Mineral oil temp. min. (°C) |
Mineral oil temp. max. (°C) |
Vegetable oil temp. min. (°C) |
Vegetable oil temp. max. (°C) |
---|---|---|---|---|---|---|---|---|---|---|---|
SKM 10 HL 3 U | 10 | L | 12 | M 18x1,5 | 3 | 250,0 | 4 | -30 | 100 | -15 | 80 |
SKM 13 HL 3 U | 12 | L | 15 | M 22x1,5 | 3 | 250,0 | 4 | -30 | 100 | -15 | 80 |
DN = Nominal diameter, nominal width – SF gek. = Safety factor coupled
Accessories
![](/images/up.gif)
- SKM ZUB BLINDSTECKER
- Dummy connector for plug-in coupling sleeve
- SKM ZUBS
- Dust protection coupling sleeve, SKM..
Spare parts
![](/images/up.gif)
- SKM ORING
- O-ring for SKM
- SKM STUETZRING
- Support ring for SKM
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.